Cadalyst - October 2008 - (Page 28)

cadalystlabsreview The final benchmark test for the Xi MTower 2P64X workstation was the full SPECviewperf 10 benchmark (www.spec.org), which works under both Windows XP and Vista. The scores for each of the component tests in the performance evaluation are listed below. The System The Xi MTower 2P64X workstation that Cadalyst received for evaluation was housed in a visually striking and large Xi NetRAIDer Sound Proof Cosmos 1000 ATX case that proved to be quiet and offered lots of room for expandability. Inside the decidedly space-age case was an Intel Skulltrail i5400 Express C.S. D5400XS motherboard that had two Intel Core 2 Extreme Quad QX9775 Skulltrail processors, which were overclocked to 3.60 GHz and cooled with a Silent Water Cooling system. The Intel DS5400XS motherboard featured a 1,600MHz front side bus and could accommodate as much as 16 GB of RAM when fully populated. The design featured two FireWire IEEE 1294 connectors, 7.1 Dolby on the motherboard, and eight USB 2.0 connectors. SLI and Crossfire multi-GPU support was incorporated. A beefy 1250-W power supply is required for this system, but the watercooling system keeps the Xi MTower 2P64X moderately quiet during operation. A well-located panel at the top front of the system provides easy access to four USB 2.0 connectors, the power and reboot switches, and connectors for both earphones and a microphone. Although 16 GB of RAM is accommodated, this MTower 2P64X system came with 4 GB of DDR2 800-MHz ECC Dual Rank Interleave heat spreader RAM in two DIMMs. The system included two Western Digital Raptor 150-GB, 10,000-rpm SATA hard drives that featured a 16-MB cache and response times faster than 9 ms. A combination DVDRW and CD-RW double media (4.7/8.5 GB) 18x optical drive rounded out the drive complements for this particular system. All together, it had five 5.25” drive bays and six 3.5” bays, which combined with the beefy power supply to offer a great deal of expandability. Expandability options were rounded out by the motherboard’s two PCI slots and four 16x PCIe slots. Input for the Xi MTower 2P64X system included a Logitech Deluxe black Windows keyboard and a Logitech 2+ PS/2 black optical mouse. During the time I had the Xi MTower 2P64X in house, it proved to handle everything that I needed it to do with no problems whatsoever. The system was responsive, fast to boot, quiet, and unobtrusive in operation. In the benchmark tests, the Xi MTower 2P64X system performed quite well. Running AutoCAD 2009 with the OpenGL drivers selected, I ran the C2008 benchmark and obtained a C2008 total index score of 275 in 78 minutes. With the Direct3D drivers selected, the system produced a C2008 total index score of 351 in 62 minutes. With two simultaneous sessions running concurrently using the Direct3D drivers, one test produced a score of 315 in 66 minutes and the second test produced a score of 349 in 67 minutes, for a combined score of 664 in 67 minutes. With Autodesk 3ds Max Design 2009 running MAXBench4 using the native OpenGL driver, the system produced a combined high/low average score of 87.11. With the Direct3D driver, the combined high/low average score was 222.02. Using the NVIDIA MAXtreme driver v.10.00.01, the combined high/low average score was 229.77. Using a modified prerelease version of SPECapc for 3ds Max 9 that had been modified to work with Autodesk 3ds Max Design 2009, the MTower 2P64X system on three test runs produced an averaged CPU render score of 12.54, an averaged graphics score of 3.27, and an averaged hardware shaders score of 7.53. For the full SPECviewperf 10 benchmark, the composite scores were: 40.09 for 3dsmax-04, 50.85 for catia-02, 44.62 for ensight-03, 172.56 for maya-02, 44.18 for proe-04, 84.62 for sw-01, 26.24 for tcvis-01, and 28.23 for ugnx-01. These scores all are very good for a system based on quad-core processors, with the effects of the additional cores showing up in the performance scores — especially in the SPECapc benchmark. The ViewSonic Optiquest Q241wb 24” LCD monitor that @Xi Computer shipped with the Xi MTower 2P64X workstation offered a video response time of 5 ms. It featured 1,920 x 1,200 resolution, 400-cd/m2 typical brightness, and a typical 800:1 contrast ratio. The monitor tilted in a –5° to +15° range and consumed 85 W when in operation. Color purity was very good, as were brightness, contrast, focus, convergence, and geometric distortion. Raster rotation showed no problems, and the on-screen menu (OSM) was adequate. This monitor was good, but didn’t offer the niceties and feature sets available in more expensive displays. With its speedy response time it was, however, a good match for the MTower 2P64X workstation. Delivering High Performance Combined, this workstation and monitor make for a highend system with lots of extras, and the package is priced accordingly. The $8,636.13 price tag included ground shipping to the East Coast and a standard one-year warranty with express advance parts replacement. A number of other warranty plans are available from @Xi Computer, including on-site coverage. The ViewSonic monitor is covered by a one-year limited warranty on parts, labor, and the backlight. This high-performance, pricey professional system delivers on performance for those who run the kinds of applications that can take advantage of the extra processor cores and memory. Xi Computer consistently produces some of the speediest systems for CAD, digital-content creation, and engineering applications, and the Xi MTower 2P64X will not disappoint those whose pockets are deep enough to afford this workhorse. Highly Recommended. Ron LaFon, a contributing editor for Cadalyst, is a writer, editor, and a computer graphics and electronic publishing specialist from Atlanta, Georgia. He is a principal at 3Bear Productions in Atlanta. 28 www.cadalyst.com cadalyst October 2008 http://www.spec.org http://www.cadalyst.com

Table of Contents Feed for the Digital Edition of Cadalyst - October 2008

Cadalyst - October 2008 Contents Editor’s Window Cad Central SimCity for Real Designs Spring to Life — 3D Publishing Tools Make File Sharing as Easy as Opening a Book Xi MTower 2P64X — Dual Quad-Core Workstation ArchiCAD 12 — BIM Software Dell Precision M6300 — High-End Mobile Workstation Cad Manager Mcad Modeling Aec Insight Cad Cartoon Issue Indexes Hot Tip Harry

Cadalyst - October 2008

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.