Cadalyst - December 2007 - (Page 21) “using River Tools the second time was about 3 hrs. And now with the addition of River Tools being able to read each alignment that crosses the main channel I estimate that I could save another 1.5 hrs.” “ River Tools is a great piece of software, that literally saved days of work.” “ We turned hundreds of river alignments with surveyed points into cross sections in the fraction of time it used to take us.”” “ Payback 1st job!” When Using HEC-RAS and LDD/Civil 3D, Steltman Software Makes Your Design Flow ver wanted to more easily interface HEC-RAS with LDD or Civil 3D? You can do that easily with River Tools from Steltman Software. Create geo-referenced sections from alignments and profiles or sections including cut lines, reach lengths and bank stations. When the design is done, draw river banks, boundaries, channel CL and sections from HEC-RAS.sdf files. Then when the banks are imported into LDD/Civil 3D create the floodplain extents by intersecting the water levels with the original ground surface between sections. E Visit us at steltmansoftware.com to review an AVI of the software being used and down-load a FREE 30 day trial version. E-mail: enquries@rsteltman.com Toll Free: 1.866.260.2514 PRODUCTS CARRYING THIS LOGO ARE NOT NECESSARILY AUTODESK PRODUCTS AND AS SUCH ARE NOT WARRANTED BY AUTODESK. AUTOCAD CIVIL 3D IS A REGISTERED TRADEMARK OF AUTODESK, INC. AUTODESK, THE AUTODESK LOGO, AND AUTOCAD CIVIL 3D ARE REGISTERED TRADEMARKS OF AUTODESK, INC. http://steltmansoftware.com http://steltmansoftware.com
Table of Contents Feed for the Digital Edition of Cadalyst - December 2007 Cadalyst - December 2007 Contents Editor's Window Cad Central Autodesk Gets Digital Top Honors - Saluting Outstanding CAD Products NX 5, Part 2 — CAD/CAM/CAE Software Autodesk 3ds Max 2008 —3D Modeling, Animation, and Rendering Software Document Management: Is It Still Valid? Standardizing 3D Modeling Nomenclature Share and Share Alike Cad Cartoon Issue Indexes Cad Fidential Cadalyst - December 2007 Cadalyst - December 2007 - Cadalyst - December 2007 (Page Cover1) Cadalyst - December 2007 - Cadalyst - December 2007 (Page Cover2) Cadalyst - December 2007 - Cadalyst - December 2007 (Page 3) Cadalyst - December 2007 - Contents (Page 4) Cadalyst - December 2007 - Contents (Page 5) Cadalyst - December 2007 - Contents (Page 6) Cadalyst - December 2007 - Contents (Page 7) Cadalyst - December 2007 - Editor's Window (Page 8) Cadalyst - December 2007 - Editor's Window (Page 9) Cadalyst - December 2007 - Editor's Window (Page 10) Cadalyst - December 2007 - Editor's Window (Page 11) Cadalyst - December 2007 - Cad Central (Page 12) Cadalyst - December 2007 - Autodesk Gets Digital (Page 13) Cadalyst - December 2007 - Autodesk Gets Digital (Page 14) Cadalyst - December 2007 - Autodesk Gets Digital (Page 15) Cadalyst - December 2007 - Autodesk Gets Digital (Page 16) Cadalyst - December 2007 - Autodesk Gets Digital (Page 17) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 18) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 19) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 20) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 21) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 22) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 23) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 24) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 25) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 26) Cadalyst - December 2007 - Top Honors - Saluting Outstanding CAD Products (Page 27) Cadalyst - December 2007 - NX 5, Part 2 — CAD/CAM/CAE Software (Page 28) Cadalyst - December 2007 - NX 5, Part 2 — CAD/CAM/CAE Software (Page 29) Cadalyst - December 2007 - NX 5, Part 2 — CAD/CAM/CAE Software (Page 30) Cadalyst - December 2007 - NX 5, Part 2 — CAD/CAM/CAE Software (Page 31) Cadalyst - December 2007 - Autodesk 3ds Max 2008 —3D Modeling, Animation, and Rendering Software (Page 32) Cadalyst - December 2007 - Autodesk 3ds Max 2008 —3D Modeling, Animation, and Rendering Software (Page 33) Cadalyst - December 2007 - Document Management: Is It Still Valid? (Page 34) Cadalyst - December 2007 - Document Management: Is It Still Valid? (Page 35) Cadalyst - December 2007 - Document Management: Is It Still Valid? (Page 36) Cadalyst - December 2007 - Standardizing 3D Modeling Nomenclature (Page 37) Cadalyst - December 2007 - Standardizing 3D Modeling Nomenclature (Page 38) Cadalyst - December 2007 - Standardizing 3D Modeling Nomenclature (Page 39) Cadalyst - December 2007 - Share and Share Alike (Page 40) Cadalyst - December 2007 - Share and Share Alike (Page 41) Cadalyst - December 2007 - Share and Share Alike (Page 42) Cadalyst - December 2007 - Issue Indexes (Page 43) Cadalyst - December 2007 - Issue Indexes (Page 44) Cadalyst - December 2007 - Issue Indexes (Page 45) Cadalyst - December 2007 - Cad Fidential (Page 46) Cadalyst - December 2007 - Cad Fidential (Page Cover3) Cadalyst - December 2007 - Cad Fidential (Page Cover4)
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.