Consulting-Specifying Engineer - August 2008 - (Page 60) New Products » INPUT RS# AT WWW.CSEMAG.COM/QUICKRESPONSE » » E-MAIL PRODUCT NEWS TO CSEPRODUCTS@REEDBUSINESS.COM » » » » » » » » » » » » » » » » Fire alarm system The Farenhyt IFP series and IntelliKnight products engineered by Silent Knight provide a number of installation advantages that reduce maintenance costs and enhance system performance. The units communicate with every sensor and module in the fire system, and the panel can provide detailed history reports on individual components, thus helping to reduce false alarms. www.silentknight.com #11 Humidifiers Designed by DRI-STEEM Corp., Vapor-logic 4 is a Web-enabled controller that can set, view, or adjust DRI-STEEM gas-to-steam humidifiers. The controller can communicate to the device with a direct Ethernet connection or through a network. A USB port is available to back up and restore data or configuration. www.dristeem.com #12 Occupancy sensors Eliminate waste, reduce energy costs, and meet local energy code requirements with the Square D commercial grade wallswitch occupancy sensors from Schneider Electric. The sensors’ single- and dual-circuit models use both passive infrared and light-level sensor technologies to shut off lights in offices, private restrooms, utility rooms, and employee break rooms during unoccupied periods. The sensors do not require a neutral connection or minimum load, and all models feature a 180-degree field of view, while achieving 300-sq ft of minor motion coverage. The three available models include a wide-angle lens, which features 2,500 sq ft of coverage at 8 ft; a long-range lens, which provides 102 linear ft at 10-ft mounting height; and a high-bay lens, which features 54 linear ft at 30-ft mounting height. www.squaredlightingcontrol.com #13 Emergency lighting The EM Integral option engineered by Prescolite offers easier maintenance while preserving the aesthetic integrity of lighting fixtures and ceilings. The unit combines the indicator light and test button into one component inside the reflector, thus removing the red button that was previously installed on ceilings. The test switch is prewired and can be installed on the fixture without modification. A dowel rod can be used after installation to operate the test switch, which eliminates the need for a ladder. www.prescolite.com #14 60 Consulting-Specifying Engineer • AUGUST 2008 http://www.csemag.com/quickResponse http://www.silentknight.com http://www.dristeem.com http://www.squaredlightingcontrol.com http://www.prescolite.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.