IEN - January 2009 - (Page 20)

IEN / JANUARY ’09 PAGE 20 Free Samples TPP Tape is alternative to Consisting of tensilized polypropylene (TPP) strapping tape with metallic appearance, tesa 51010 High Load can contour to almost any shape. Synthetic rubber adhesive system adheres to lowsurface energy substrates and removes cleanly from most surfaces. tesa tape, inc.; 800-426-2181 704-553-4675; Tech Contact: Sam Brackett www.ieninfo.com/11222 -265 or circle 265 on card filament tapes. Swivel Fitting with O-ring seals Swivel fittings have O-ring seal located above 10-32 UNF threads, which guarantees a leak-free connection. Swivel elbows, swivel tees, and straight swivel barb configurations are available. Design allows barb to swivel 360 deg in threaded base. Nylon or polypropylene fittings are available with Buna-N, ethylene propylene, silicone, or Viton O-rings. Air Logic; 800-558-5950 262-639-9035; Tech Contact: Jay Haertel www.ieninfo.com/11222 -269 or circle 269 on card Cable Tie resists acids, chemicals, salts, and heat. Available in 6 to 29 in. lengths with 100 or 250 lb tie tensile strength, Type 316 stainless steel cable ties are rated for service at 1,000°F uncoated and 302°F when polyester or epoxy coated. They are supplied in plain and ladder styles, and in spring style that maintains tension when clamped onto solid objects. Ties can be installed manually or with automatic tension and cutoff tool. ACT Fastening Solutions; 800-861-7228; Tech Contact: David Williams www.ieninfo.com/11222 -266 or circle 266 on card Polyurethane Hose with thermally Reinforced with bronze-coated spring steel wire helix, Flx-Thane has elasticized cuff with 2 to 12 in. ID that provides smooth clamping surface and suits vapor recovery and dust collection applications. Flexible, compressible, and abrasion-resistant hose comes in 2 wall thicknesses: 0.03 in. thick MD and SD Series and 0.02 in. thick LD Series. Clear (FDA acceptable), black, and static control versions are available. Flexaust Co., Inc.; 888-465-0445; Tech Contact: Michael O’Brien www.ieninfo.com/11222 -270 or circle 270 on card molded soft cuff Automotive Ignition Set fits 7 and 8 For all GM V/8 and V/6 engines from 1997 through current production, GM ignition set is fully integrated for OEMs and second tier automotive suppliers. It combines CB-67 silicone boot for dielectric seal, FE-1 nylon ferrule with locking tang for connection and positive terminal location, and DT-75 stainless steel terminal with tempered spring clip that connects securely to spark plug. ETCO Inc; 401-467-2400; Tech Contact: Sean C. Dunn www.ieninfo.com/11222 -267 or circle 267 on card www.ieninfo.com/11222 -263 or circle 263 on card mm ignition wire. Transfer Adhesive bonds to range of foam substrates. Type 7434-74 includes 74 lb liner that can be removed after lamination to fragile low-density foams without tearing foam. It measures 4 mil thick with adhesive thickness of 3.75 mil. Aggressive, acrylic-based transfer adhesive tolerates elevated temperatures. Adchem Corp.; 631-727-6000 www.ieninfo.com/11222 -271 or circle 271 on card www.ieninfo.com/11222 -264 or circle 264 on card www.ieninfo.com/11222 -268 or circle 268 on card www.ieninfo.com/11222 -272 or circle 272 on card http://www.ieninfo.com/11222-265 http://www.ieninfo.com/11222-269 http://www.ieninfo.com/11222-265 http://www.ieninfo.com/11222-263 http://www.ieninfo.com/11222-269 http://www.ieninfo.com/11222-266 http://www.ieninfo.com/11222-270 http://www.ieninfo.com/11222-266 http://www.ieninfo.com/11222-270 http://www.ieninfo.com/11222-271 http://www.ieninfo.com/11222-267 http://www.ieninfo.com/11222-263 http://www.ieninfo.com/11222-271 http://www.ieninfo.com/11222-267 http://www.ieninfo.com/11222-263 http://www.ieninfo.com/11222-263 http://www.ieninfo.com/11222-268 http://www.ieninfo.com/11222-264 http://www.ieninfo.com/11222-264 http://www.ieninfo.com/11222-272 http://www.ieninfo.com/11222-268 http://www.ieninfo.com/11222-272 http://www.ieninfo.com/11222-268 http://www.ieninfo.com/11222-264 http://www.ieninfo.com/11222-272

Table of Contents Feed for the Digital Edition of IEN - January 2009

IEN - January 2009 Contents Hot New Products MRO/Plant Maintenance Problem Solvers Focus: CAD/CAM/CAE Free Catalogs & Tech Tips Plant Efficiency: Cost Cutters Free Samples Lifestyle Engineering Now on IEN.com Trade Show: ProMat 2009 IEN Best Brands Winners IEN’s WebReviews: Sensors Resource Center Advertiser Contact

IEN - January 2009

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.