IEN - January 2009 - (Page 33)

page 33 IeN / JaNUaRY ’ 09 Milling Cutter with 4 cutting Z-Plunge includes interchangeable coolant nozzles that come in 9 different sizes. Cutter is available in screw-on, end mill, and shell mill styles with sizes ranging from 32 to 160 mm. Offered in both ground and direct-pressed forms, inserts come in various grades to suit most workpiece materials. Kennametal Inc.; 800-4467738 724-539-5330 www.ieninfo.com/11222 -389 or circle 389 on card edges per insert storage requirements. Modular Workbench meets tool sweeping widths Vacuum Cleaner with 14 and 17 in. V Series dual-motor upright vacuum cleaners operate with separate brush drive and vacuum motor to remove deeply embedded soil. Model V Pro Plus can be switched from high power 68 dB to quiet mode at 62 dB, depending on noise sensitivity of environment. Vacuums include telescoping wand, 4:1 expandable hose, and onboard tools. Minuteman International; 800-323-9420 630-627-6900; Tech Contact: Cherese Lyon www.ieninfo.com/11222 -394 or circle 394 on card space-saving design. Constructed of all-welded steel and standing at 58 deg with 24 in. width, Vestil lock and roll folding ladders are available in 40, 50, and 60 in. heights and have total capacity of up to 350 lb. Two wheels lock into place. Steps measure 7 in. deep for safe climbing. C&H Distributors, Inc.; 866460-7802 Folding Ladder has portable, Offered in various preconfigured double-bay (16 ft long) or single-bay (8 ft long) configurations, SHURETECH bench system may also be customdesigned. At 39-1/8 in. high, workbenches have 29 in. deep benchtops of stainless steel over wood core and are available with wall-mounted upper cabinets; tool cabinets with 400 lb drawer capacity; and stainless steel utility chase panels. Shure Manufacturing Corp.; 800-227-4873 www.ieninfo.com/11222 -393 or circle 393 on card www.ieninfo.com/11222-390 or circle 390 on card Gas Generator optimizes zero air and hydrogen output. Available in 3 models, Balston FID-3500 Gas Stations will produce up to 3.5 Lm of hydrocarbonfree air from existing compressed air supply. They will also produce 500 cc/min of fuelgrade hydrogen from deionized water. Units include ergonomic cabinet, visual operational status display, automatic water filling for continuous operation, and closed-loop water management system. With generators, cylinder gas users can supply, control, and automate their gas supplies. parker Hannifin Corp., Filtration & Separation Div.; 800-343-4048; Tech Contact: Judy Silva www.ieninfo.com/11222 -391 or circle 391 on card Workpiece Holding Clamp uses sharp edges for gripping. Comprising cam screw and hardened washer, Knife Edge Clamp is made of hardened steel and has sharp edges to optimize grip on castings and rough cut material. Low-profile clamp tightens workpiece with 1/4-turn of screw. Available with 3/8-16, 1/2-13, and 5/8-11 size screws, clamp helps increase production and conserve space. Mitee-Bite products Inc.; 800-543-3580 www.ieninfo.com/11222 -392 or circle 392 on card www.ieninfo.com/11222 -395 or circle 395 on card http://www.ieninfo.com/11222-393 http://www.ieninfo.com/11222-389 http://www.ieninfo.com/11222-394 http://www.ieninfo.com/11222-389 http://www.ieninfo.com/11222-390 http://www.ieninfo.com/11222-394 http://www.ieninfo.com/11222-393 http://www.ieninfo.com/11222-395 http://www.ieninfo.com/11222-390 http://www.ieninfo.com/11222-395 http://www.ieninfo.com/11222-391 http://www.ieninfo.com/11222-391 http://www.ieninfo.com/11222-392 http://www.ieninfo.com/11222-392 http://www.ieninfo.com/11222-395 http://www.ieninfo.com/11222-395

Table of Contents Feed for the Digital Edition of IEN - January 2009

IEN - January 2009 Contents Hot New Products MRO/Plant Maintenance Problem Solvers Focus: CAD/CAM/CAE Free Catalogs & Tech Tips Plant Efficiency: Cost Cutters Free Samples Lifestyle Engineering Now on IEN.com Trade Show: ProMat 2009 IEN Best Brands Winners IEN’s WebReviews: Sensors Resource Center Advertiser Contact

IEN - January 2009

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.