IEN - January 2009 - (Page 35) page 35 IeN / JaNUaRY ’09 Dispensing System uses Model PDS-100 uses precision stepper motors to control valveless piston pumps and offers range of 500 nl per dispense to 2 lpm continuous flow. It accommodates all FMI pump sizes in both fixed and adjustable displacement configurations. Pump heads are mounted to control unit, which is housed in rugged anodized aluminum enclosure that has LED readout to display menu-driven programming, as well as membrane switches for navigating through programming steps. Fluid Metering, Inc.; 800-223-3388 516922-6050; Tech Contact: Herb Werner www.ieninfo.com/11222 -417 or circle 417 on card precision stepper motors. polypropylene. Photopolymer Material simulates Available in 2 kg cartridges, Durus FullCure materials support Eden250 and Eden260 office machines. DurusWhite Resource Center Adhesives, Coatings & Potting Compounds High Temperature 3200 °F Full catalog available! AREMCO FullCure430 gives white transparent look and feel of final products made of polypropylene, and also simulates strength of polypropylene. Material has Izod Notched Impact of 44.22 J/m, elongation at break of 44.2%, and modulus of elasticity of 1,135 MPa. It is fatigue resistant and enables snap-fit functionality over time. Objet geometries Inc.; 877489-9449 www.ieninfo.com/11222 -421 or circle 421 on card www.aremco.com e-mail: aremco@aremco.com 707-B Executive Boulevard Valley Cottage, NY 10989 Tel 845-268-0039 Fax 845-268-0041 AREMCO PRODUCTS, INC. www.ieninfo.com/11222 -427 or circle 427 on card Load Cell monitors static and Designed to operate in harsh industrial environments, Model DLRx can be used to measure both compression and tension/compression over 0.5 to 100 kN range in static or dynamic applications. Designs start at 32 mm dia and are built with IP65/IP67 protection and SS housings. Providing dynamic signal processing and accuracy to 0.3%, sensors offer transverse sensitivity optimized by compensation for noncentrally applied forces. Baumer Ltd.; 800-937-9336 860-620-6374; Tech Contact: Sean Snodgrass www.ieninfo.com/11222 -418 or circle 418 on card dynamic forces. www.ieninfo.com/11222-424 www.ieninfo.com/11233 -487 or circle 487 on card 424 Shaft Seal utilizes noncontacting technology. Designed to work with shaft dia from 1 to 36 in., Water Mizer Shaft Seal accepts severe radial and angular shaft runout up to 1/2 in. Shaft floats on water barrier directly on shaft, providing unlimited movement without placing any stress or strain on product. With no moving parts, seal attains zero contact, zero wear, and zero frictional drag. Inpro/Seal Co.; 800-447-0524 309-787-4971 www.ieninfo.com/11222 -422 or circle 422 on card Adapter supports Ethernet/IP For Series ACS350 drives, Model FENA01 offers drive solution to building control systems. Flexible plugin Ethernet adapter provides connectivity to controllers. aBB Inc., Drives & Motors; 262-780-3873; Tech Contact: Ken Graber www.ieninfo.com/11222 -419 or circle 419 on card and Modbus/TCP protocols. www.ieninfo.com/11222 -425 or circle 425 on card www.ieninfo.com/11222 -428 or circle 428 on card Lifting Magnet handles flat and round materials. Adhesive Melter with dual AltaBlue TT systems can deliver variety of hot melt adhesives in applications requiring duplicate metered streams with bead consistency. Along with choice of 3 displacement dual stream pumps, melters offer variablespeed ac motors and key-to-line capability. Tubular Teflon-coated tank eliminates dead corners and minimizes adhesive degradation. Control panel offers choice of programming methods and displays system status. Nordson Corp; 800-683-2314 www.ieninfo.com/11222 -420 or circle 420 on card stream pumps Constructed with Erium 3000 rare-earth magnet material, Model XPL-30/24 has capacity rating of 3,000 lb on flat and 2,400 lb on round material and can handle round material of 4 to 15 in. dia. Capable of handling 6 to 18 in. dia material, Model XPL-50/40 has capacity of 5,000 lb on flat material and 3,700 lb on round material. eriez; 888300-3743; Tech Contact: Keith Jones www.ieninfo.com/11222 -423 or circle 423 on card tel: 847-623-8800 www.ieninfo.com/11222 -426 or circle 426 on card www.ieninfo.com/11222 -429 or circle 429 on card Inquire Online: IENinfo.com www.ieninfo.com/11222 -430 or circle 430 on card http://www.ieninfo.com/11222-417 http://www.ieninfo.com/11222-421 http://www.ieninfo.com/11222-427 http://www.ieninfo.com/11222-424 http://www.ieninfo.com/11222-427 http://www.ieninfo.com/11222-417 http://www.ieninfo.com/11222-424 http://www.ieninfo.com/11222-418 http://www.ieninfo.com/11222-421 http://www.ieninfo.com/11222-428 http://www.ieninfo.com/11222-418 http://www.ieninfo.com/11222-425 http://www.ieninfo.com/11222-428 http://www.ieninfo.com/11222-428 http://www.ieninfo.com/11222-419 http://www.ieninfo.com/11222-425 http://www.ieninfo.com/11222-428 http://www.ieninfo.com/11222-422 http://www.ieninfo.com/11222-419 http://www.ieninfo.com/11222-423 http://www.ieninfo.com/11222-420 http://www.ieninfo.com/11222-429 http://www.ieninfo.com/11222-426 http://www.ieninfo.com/11222-426 http://www.ieninfo.com/11222-429 http://www.ieninfo.com http://www.ieninfo.com/11222-430 http://www.ieninfo.com/11222-420 http://www.ieninfo.com/11222-423 http://www.ieninfo.com/11222-430
Table of Contents Feed for the Digital Edition of IEN - January 2009 IEN - January 2009 Contents Hot New Products MRO/Plant Maintenance Problem Solvers Focus: CAD/CAM/CAE Free Catalogs & Tech Tips Plant Efficiency: Cost Cutters Free Samples Lifestyle Engineering Now on IEN.com Trade Show: ProMat 2009 IEN Best Brands Winners IEN’s WebReviews: Sensors Resource Center Advertiser Contact IEN - January 2009 IEN - January 2009 - IEN - January 2009 (Page Cover1) IEN - January 2009 - IEN - January 2009 (Page Cover2) IEN - January 2009 - IEN - January 2009 (Page 3) IEN - January 2009 - Contents (Page 4) IEN - January 2009 - Contents (Page 5) IEN - January 2009 - Hot New Products (Page 6) IEN - January 2009 - Hot New Products (Page 7) IEN - January 2009 - MRO/Plant Maintenance (Page 8) IEN - January 2009 - MRO/Plant Maintenance (Page 9) IEN - January 2009 - MRO/Plant Maintenance (Page 10) IEN - January 2009 - MRO/Plant Maintenance (Page 11) IEN - January 2009 - Problem Solvers (Page 12) IEN - January 2009 - Problem Solvers (Page 13) IEN - January 2009 - Focus: CAD/CAM/CAE (Page 14) IEN - January 2009 - Focus: CAD/CAM/CAE (Page 15) IEN - January 2009 - Focus: CAD/CAM/CAE (Page 16) IEN - January 2009 - Free Catalogs & Tech Tips (Page 17) IEN - January 2009 - Plant Efficiency: Cost Cutters (Page 18) IEN - January 2009 - Plant Efficiency: Cost Cutters (Page 19) IEN - January 2009 - Free Samples (Page 20) IEN - January 2009 - Free Samples (Page 21) IEN - January 2009 - Now on IEN.com (Page 22) IEN - January 2009 - Now on IEN.com (Page 23) IEN - January 2009 - Trade Show: ProMat 2009 (Page 24) IEN - January 2009 - Trade Show: ProMat 2009 (Page 25) IEN - January 2009 - Trade Show: ProMat 2009 (Page 26) IEN - January 2009 - Trade Show: ProMat 2009 (Page 27) IEN - January 2009 - Trade Show: ProMat 2009 (Page 28) IEN - January 2009 - Trade Show: ProMat 2009 (Page 29) IEN - January 2009 - IEN Best Brands Winners (Page 30) IEN - January 2009 - IEN Best Brands Winners (Page 31) IEN - January 2009 - IEN’s WebReviews: Sensors (Page 32) IEN - January 2009 - IEN’s WebReviews: Sensors (Page 33) IEN - January 2009 - IEN’s WebReviews: Sensors (Page 34) IEN - January 2009 - Resource Center (Page 35) IEN - January 2009 - Resource Center (Page 36) IEN - January 2009 - Resource Center (Page 37) IEN - January 2009 - Advertiser Contact (Page 38) IEN - January 2009 - Advertiser Contact (Page Cover3) IEN - January 2009 - Advertiser Contact (Page Cover4)
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.