IEN - January 2009 - (Page 9)

PAge 9 IeN / JANUARY ’09 Laser Shaft Alignment System 4-in-1 functionality PC-based express alignment Cable Test System GO laser shaft alignment system uses wired connections between display unit and laser sensors. It has dedicated horizontal and vertical shaft alignment routines. System offers large detector size, line lasers for acquisition, and built-in inclinometers in both laser transmitter-detectors. Capable of saving its data locally, system can also be connected to computer for download of data via USB connection. VibrAlign, Inc.; 800-3943279 804-379-2250; Tech Contact: Amy Newcomb www.ieninfo.com/11222 -109 or circle 109 on card CableEye checks cables and wire harnesses for opens, shorts, and miswires; measures diode forward voltage; checks resistance values from 0.3 ohm to 10 megaohms; and tests conduction and isolation resistance against specified thresholds. Light Director accessory delivers computer-assisted technique for assembling circular connectors. Light fibers, driven by superbright LED lamps, individually illuminate target cavities. Synthetic speech can also read pin number. CAMI Research Inc.; 800-776-0414 978-266-2655; Tech Contact: Chris Strangio www.ieninfo.com/11222 -113 or circle 113 on card Cordless Heat Tool Kit UT-100-TC Ultratorch Professional Heat Tool Kit can pinpoint heat, solder/desolder, remove SMT components, heat shrink, repair vinyl, spot dry, and cut or torch materials. Portable, butane-powered UT-100 Ultratorch functions as soldering iron, flameless heat tool, hot knife, and brazing torch. Kit also contains soldering, hot knife, torch, and hot air tips; wire cutter; and needle nose pliers. Master Appliance Corp.; 800-558-9413 262-633-8840 ext 117; Tech Contact: John R. Brott www.ieninfo.com/11222 -114 or circle 114 on card Cordless Drill & Driver Litheon batteries Brute Tough 18 and 14.4 V cordless drill/drivers and hammer drill/drivers have 25+1 clutch and tight-gripping 1/2 in. metal chuck. Unibody motor construction, all-metal gear train, and DuraShield housing ensure durability. Ergonomics promote grip and minimize fatigue. Offered in same voltages, Compact Tough cordless drill/drivers, providing maneuverable performance, have 20-position clutch, and 1/2 in. single sleeve chuck. Bosch Power Tools & Accessories; 877267-2499 www.ieninfo.com/11222 -110 or circle 110 on card handles 400 lb Scrap Collection Cart Scrapasaurus Model 50P16S is rotationally molded of 100% impact-resistant polyethylene with base set atop 3 steel fork tubes. Forklifts can safely pick up, transport, and lift cart, then rotate it 180 deg until completely upside down for emptying into roll-off, dump truck, baler, or Gaylord. When empty, cart may be rolled on 6 industrial-strength casters. Meese Orbitron Dunne Co. (MOD); 800-829-4535; Tech Contact: Tom Cooper www.ieninfo.com/11222 -111 or circle 111 on card www.ieninfo.com/11222 -115 or circle 115 on card http://www.ieninfo.com/11222-113 http://www.ieninfo.com/11222-114 http://www.ieninfo.com/11222-114 http://www.ieninfo.com/11222-113 http://www.ieninfo.com/11222-109 http://www.ieninfo.com/11222-110 http://www.ieninfo.com/11222-110 http://www.ieninfo.com/11222-115 http://www.ieninfo.com/11222-115 http://www.ieninfo.com/11222-111 http://www.ieninfo.com/11222-115

Table of Contents Feed for the Digital Edition of IEN - January 2009

IEN - January 2009 Contents Hot New Products MRO/Plant Maintenance Problem Solvers Focus: CAD/CAM/CAE Free Catalogs & Tech Tips Plant Efficiency: Cost Cutters Free Samples Lifestyle Engineering Now on IEN.com Trade Show: ProMat 2009 IEN Best Brands Winners IEN’s WebReviews: Sensors Resource Center Advertiser Contact

IEN - January 2009

For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.