IEN - March 2009 - (Page 11) page 11 IeN / MaRCH ’09 for large parts Sintering System for miniature parts sPro 140 and 230 SLS Centers deliver parts up to 30 in. long with smooth surfaces, built from integrated DuraForm materials. Centers can be configured with variety of performance packages including ProScan GX digital imaging system, TruTemp thermal system, and CleanSweep control technology. 3D Systems Corp.: 803-326-4080 www.ieninfo.com/11224-109 or circle 109 on card Process Analyzer Through prepositioned sensors, Argotech PA-4 provides continuous monitoring of repeating machine processes in real-time. Four sensor inputs provide tool wear or fracture detection, collision protection, machine and tool load, as boosts press capacity Toolholder Three- and 8-station versions of Ultra Multi Tools expand capacity of thick turret CNC punch press by allowing, respectively, 3 or 8 punch and die sets to be placed in 3-1/2 in. deep autoindex machine station. Quick tool change design does not require hand tools or disassembly. Each punch is adjustable for punchto-stripper lead and die penetration for sheet thicknesses from 0.02 to 0.157 in. Unit provides 0.004 in. min die clearance and sheet marking protection. Mate precision Tooling: 800-3284492. Tech Contact: John Galich well as one or 2 critical dimensions of parts. Display shows optimum production and deviations from preset tolerance limits where alarm can be generated and production is shut down. In addition, system can be used in unmanned production operations. IBag North america: 203-4070397. Tech Contact: Rick Testain www.ieninfo.com/11224-113 or circle 113 on card processes 2-part materials www.ieninfo.com/11224-110 or circle 110 on card Meter/Mix/Dispense System high pressure, high flow Waterjet Pump With support for 75,000 psi continuous operating pressure, 100 hp Model X-Stream xP90-100 waterjet intensifier pump is capable of producing flow rates of 1.45 gpm. At pressures in excess of 90,000 psi, it achieves much faster cutting speeds and lowers operating costs compared with traditional 60,000 psi pumps, enabling users to increase productivity and reduce part costs. Pump reduces taper by up to 0.001 in., and supports up to 0.017 in. orifice. Its fittings and tubing are rated for 100 ksi. Jet edge: 800-538-3343; 763-497-8700 www.ieninfo.com/11224 -111 or circle 111 on card Including positive rod displacement and dual servo drive motors, Servo-Flo 608 is designed to meter-mix and dispense 2-component materials. It is engineered to dispense 2-part urethanes, epoxies, silicones, and acrylics at rates up to 200 g/sec (1:1 ratio) in temperature-controlled robotic and manual dispensing applications. Manufacturer can dial-in material ratio, with ratios and preset volumes adjusted at operator control panel. Sealant equipment & engineering, Inc.: 734459-8600 ext 106. Tech Contact: Nick Schultz www.ieninfo.com/11224-114 or circle 114 on card www.ieninfo.com/11224 -116 or circle 116 on card www.ieninfo.com/11224-112 or circle 112 on card www.ieninfo.com/11224 -115 or circle 115 on card http://www.ieninfo.com/11224-109 http://www.ieninfo.com/11224-113 http://www.ieninfo.com/11224-109 http://www.ieninfo.com/11224-110 http://www.ieninfo.com/11224-113 http://www.ieninfo.com/11224-110 http://www.ieninfo.com/11224-114 http://www.ieninfo.com/11224-111 http://www.ieninfo.com/11224-116 http://www.ieninfo.com/11224-114 http://www.ieninfo.com/11224-116 http://www.ieninfo.com/11224-111 http://www.ieninfo.com/11224-116 http://www.ieninfo.com/11224-112 http://www.ieninfo.com/11224-115 http://www.ieninfo.com/11224-112 http://www.ieninfo.com/11224-115 http://www.ieninfo.com/11224-115 http://www.ieninfo.com/11224-112
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.