IEN - March 2009 - (Page 12) IEN / MARCH ’09 pAgE 12 expedites complex assemly high production rate Soldering/Rework System Parts Cutting Machine Coupling SmartHeat Technology with 80 W of power, Metcal MX-5000 Series provides instantaneous response to load conditions, ensuring system will not overshoot. Microprocessor-controlled systems also incorporate built-in digital power indication display, providing users with continuous feedback. Available with choice of 4 different hand-pieces, systems offer Metcal TipSaver Workstand with autosleep to minimize power use and extend tip life. OK International: 800-521-2908; 714-799-9910. Tech Contact: Sherilyn Hill www.ieninfo.com/11224 -123 or circle 123 on card Utilizing flywheel with up to 8 knives, Model 50 flywheel cutter/ puller system produces extruded plastic or rubber parts at cutting rates from 75 to 12,000 parts/min and can hold cut length tolerance to ±0.003 in. Electronically linked flywheel and puller drives ensure consistent part length accuracy. Color touchscreen interface facilitates setup and operation. Pinch roll or caterpillar puller assemblies are available. Versa Machinery: 574-266-0780 www.ieninfo.com/11224 -126 or circle 126 on card links processes Semiautomatic Transfer System How To Choosing Inspection Sensors nspection at the end of the production line is a great way for manufacturers to catch flawed products, prevent bad shipments, and avoid rejected parts, costly recalls, and product returns. However, waiting until the final check for a remedy after a product has undergone numerous value-added stages of production often creates waste and time-consuming rework. In addition, defects not caught at the source generate little information about their cause that can be used to improve the process. To increase their competitiveness, manufacturers have made inspecting product in process a major priority. Photoelectric sensors, vision sensors and vision systems have clearly emerged as the tools of choice for manufacturers in pursuit of increased quality and profitability through inspection, product tracking and process control. But these tools are also one of the least understood and most erroneously specified areas of automated manufacturing . . . read the full article at www.ien.com/article/cognex Cognex Corp.: 508-650-3000 www.ieninfo.com/11224 -129 or circle 129 on card TransferModule 1500 is capable of linking production processes that require one or 2 linear movements. Individual processes, such as stripping or crimping, are I examines powder metal parts Inspection System Weight Compensation software option for nondestructive test system-resonant acoustic method (NDT-RAM) can automate system testing criteria modification based on variances in weight for powder metal components. It automatically modifies templates based on part weight and allows software to identify real-time small resonant frequency shifts resulting from internal or external flaws. Modal Shop, Inc.: 800-860-4867; 513-351-9919. Tech Contact: Gail Stultz carried out using standard machines that are integrated into linear transfer system, whereas technically difficult processes, such as insertion of component, are carried out manually by operator. Schleuniger, Inc.: 877-902-1470; 603-668-8117 www.ieninfo.com/11224 -127 or circle 127 on card www.ieninfo.com/11224 -124 or circle 124 on card www.ieninfo.com/11224-125 or circle 125 on card www.ieninfo.com/11224 -128 or circle 128 on card www.ieninfo.com/1122 4-130 or circle 130 on card http://www.ieninfo.com/11224-126 http://www.ieninfo.com/11224-126 http://www.ieninfo.com/11224-123 http://www.ieninfo.com/11224-123 http://www.ieninfo.com/11224-123 http://www.ieninfo.com/11224-127 http://www.ieninfo.com/11224-129 http://www.ieninfo.com/11224-124 http://www.ieninfo.com/11224-129 http://www.ieninfo.com/11224-129 http://www.ieninfo.com/11224-124 http://www.ieninfo.com/11224-127 http://www.ieninfo.com/11224-128 http://www.ieninfo.com/11224-125 http://www.ieninfo.com/11224-130 http://www.ieninfo.com/11224-125 http://www.ieninfo.com/11224-128 http://www.ieninfo.com/11224-130 http://www.ieninfo.com/11224-125 http://www.ieninfo.com/11224-128 http://www.ieninfo.com/11224-130
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.