IEN - March 2009 - (Page 25) PAGE 25 IEN / MARCh ’09 variety of bellows types Protective Cover comes in Custom-engineered, protective bellows-type covers protect machinery from oil, dirt, chips, and other contaminants. They are available in way covers, photographic bellows, linear bearing way covers, ballscrew and rod covers, and die set shields. A & A Gortite: 800298-2066; 262-786-1500 www.ieninfo.com/11224 -389 or circle 389 on card 2-Post Direct Lifter includes metric air cylinders Equipped with linear bearings, Models TDL2 and TDL4 deliver smooth, consistent lifting action. Air cylinders include adjustable cushion control, built-in lubrication system, and position sensing capability. Offered in bore sizes from 40 to 100 mm, Model TDL2 has stroke lengths from 25 to 400 mm. Model TDL4 has 40 mm bore air cylinder with stroke lengths from 25 to 250 mm. Dadco, Inc.: 800-323-2687 www.ieninfo.com/11224 -393 or circle 393 on card containers to curb side CartCaddy dumpster mover pulls heavy trash and recycling containers and dump- Dumpster Mover pulls heavy Position Feedback Cylinder resists contamination Air Compressor has contact-cooled design Rated from 125 to 200 hp, continuous-duty rotary screw air compressors maintain steady 115°F running temperature, eliminating overheat events and nuisance shutdowns. Units have sickle-shaped blade design that minimizes drag, and Star-delta starter design, which provides cushioned, controlled startup and avoids power surges. Intelligent Controller includes LCD graphic interface, diagnostics, and builtin sequencer, which can coordinate up to 3 machines. Ingersoll-Rand Co., Compressed Air Solutions: 800-247-7378; 704-896-4000. Tech Contact: Ed Redmond www.ieninfo.com/11224 -390 or circle 390 on card to NAAMS style Locating Pin offers alternative Bullet nose locating pins offer 3 mm flange thickness and 8 mm female thread size for 16 mm dia shank. They come standard with round or diamond-shaped head styles. Shank designs include male/female thread or notched for set screw. Flanged small or large head pin types are offered with various dimensions for base, pin length, head taper start point length, and diameter. Choice of materials is available. Misumi USA, Inc.: 800-681-7402; 847-843-9105 ext 253. Tech Contact: Chris Blaszczyk sters from underground parking lots to street level for curb-side pick up. It is able to move trash bins over asphalt, through snow and ice, and in tight areas, as well as in open spaces. Compact and ergonomic, system is battery powered with 36 V motor that is able to handle dumpsters from 500 to 10,000 lb. DJProducts, Inc.: 800686-2651. Tech Contact: Jeff Berg www.ieninfo.com/11224 -396 or circle 396 on card Factory-calibrated for 0 to 10 Vdc output, Series PFCN resists effects of moisture, oil, airborne debris, dust, and airline contamination. Magnetostrictive sensor, fixed inside noncontact cylinder, detects position as piston moves back and forth, avoiding cylinder wear and tear from rapid short-stroke cycling. All models come in 09, 17, 31, 50, and 70 bore sizes and strokes up to 9 in. Rod lock models are also available. Bimba Manufacturing Co.: 800-4424622; 708-534-8544 www.ieninfo.com/11224 -399 or circle 399 on card Custom-Designed Cart transports extra long crates For long, heavy, and awkward size container handling, Crate Cart enables manual transfer through tight aisle ways and limited space areas. It has 1,500 lb load bearing capacity and has overall dimensions of 155 x 31 x 16 in. Designed to withstand rigors of loading via forklift, modular cart is constructed with plastic-coated steel pipes, cross bracing throughout length, and 6 large-diameter swivel casters. Creform Corp.: 800-839-8823; 864-9891741. Tech Contact: Keith Soderlund www.ieninfo.com/11224 -400 or circle 400 on card Mpixel CMOS Image Sensor www.ieninfo.com/11224 -394 or circle 394 on card for automotive market One Mpixel Model OV9710 is built with OmniPixel3-HS technology, which enables it to operate in virtually every lighting condition, from bright daylight to nearly complete darkness. Housed in lead-free QFP package, unit provides full-frame, sub-sampled or windowed 8-bit/10-bit images in raw RGB format via digital video port. Sensor is 1/4 in. and delivers fullframe video at 30 fps and VGA resolution at 60 fps. OmniVision Technologies, Inc.: 408-567-3077. Tech Contact: Scott Foster www.ieninfo.com/11224 -397 or circle 397 on card Packaged Blower programmable, and PC controlled Torque Tester is modular, has integrated controllers Model TSTM-DC motorized torque test stand offers 100 lb-in. capacity and integrated angle indication with RS232 data output. Modularity enables configuration to test requirements. Lever-operated slider with travel stops facilitates and accelerates sample engaging and disengaging. Universal tester can also be configured to stop at or cycle between programmable angle limits or torque limits. Mark-10 Corp.: 888-627-5836; 631-842-9200. Tech Contact: Mark Fridman www.ieninfo.com/11224 -391 or circle 391 on card Part of Com-paK Plus family, DB Series Models DB 166C and DB 236C are available from 7.5 to 60 hp and with capacities up to 812 cfm at 3 psi. Controller integrates motor starters and instrumentation, ensuring reliable operation. DB Series has efficient tri-lobe blower design and selection between reduced voltage starter or frequency converter. Kaeser Compressors, Inc.: 800-777-7873; 540834-4520. Tech Contact: Michael Camber www.ieninfo.com/11224 -395 or circle 395 on card Alarm Annunciator can be set to any common ISA sequences Providing visible and audible alarms for up to 8 inputs, Series AN2 indicating alarm annunciator also has 2 SPDT relay outputs that can be used to initiate external alarms, buzzers, or paging devices. Integral 24 Vdc power supply can power most level, temperature, pressure, or flow switches. Via front-panel pushbuttons or rear terminal block, audible alarm conditions can be acknowledged, reset, or silenced. Dwyer Instruments, Inc.: 800-872-9141; 219-879-8000 www.ieninfo.com/11224 -401 or circle 401 on card Plug-and-play CN-TOT promotes access to control dial and on/off controlling. Rated for 120 or 240 Vac, it has 15 A capacity, thermocouple sensor accuracy of ±2.7°F, -40 to +160°F operating temperature range, and 2°F differential. Included are Type J thermocouple with mini and standard connector input, and 8 ft input power cord with standard plug. Omega Engineering, Inc.: 888-826-6342. Tech Contact: John Cosch www.ieninfo.com/11224 -392 or circle 392 on card T/C Temperature Controller is portable UL & CSA Switch Rated Dead Front Up to 100 kA Short Circuit Ratings Simplify equipment change-outs with switch rated plugs & receptacles Meltric’s Motor Plugs utilize a motor starter contact technology that allows users to safely make and break electrical connections. Other safety features, including 100 kA short circuit ratings, help protect users from arc flash injury and simplify NEC and OSHA /NFPA 70E compliance. Also ideal for: • • • Welding machines Power Distribution Rated up to 60 hp, 200A, IP 66/67 Portable Equipment Inquire about our FREE trial program www.ieninfo.com/11224 -398 or circle 398 on card www.meltric.com • 800.433.7642 www.ieninfo.com/11224 -402 or circle 402 on card http://www.ieninfo.com/11224-389 http://www.ieninfo.com/11224-393 http://www.ieninfo.com/11224-399 http://www.ieninfo.com/11224-396 http://www.ieninfo.com/11224-389 http://www.ieninfo.com/11224-393 http://www.ieninfo.com/11224-399 http://www.ieninfo.com/11224-390 http://www.ieninfo.com/11224-394 http://www.ieninfo.com/11224-400 http://www.ieninfo.com/11224-396 http://www.ieninfo.com/11224-394 http://www.ieninfo.com/11224-400 http://www.ieninfo.com/11224-390 http://www.ieninfo.com/11224-395 http://www.ieninfo.com/11224-391 http://www.ieninfo.com/11224-401 http://www.ieninfo.com/11224-395 http://www.ieninfo.com/11224-397 http://www.ieninfo.com/11224-391 http://www.ieninfo.com/11224-392 http://www.ieninfo.com/11224-398 http://www.ieninfo.com/11224-398 http://www.ieninfo.com/11224-392 http://www.ieninfo.com/11224-402 http://www.ieninfo.com/11224-402 http://www.ieninfo.com/11224-398 http://www.ieninfo.com/11224-402
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.