IEN - March 2009 - (Page 29) page 29 I eN / March ’09 One-Part Epoxy Adhesive Sheetless Thermoforming STF Sheetless ThermoForming produces large thermoformed parts on 3 to 5 trolleys in circular track architecture, coating molten polymer directly onto onboard traditional thermoforming molds in one process cycle. Premanufactured sheets are not required, and array of polymers can be used. LrM Industries, LLc: 321-635-9797. Tech Contact: Jim Callough www.ieninfo.com/11224 -251 or circle 251 on card is offered in one-step process Environment-Friendly Absorbent handles non-aggressive liquids Made from 100% recycled postconsumer paper waste, fiberbased Gran-sorb absorbs oils, solvents, and non-aggressive liquids on contact. It is created using fibrous sludge waste from select paper mills and has one-to-one weight-to-weight absorbency. Industrial absorbent is dust- and silica-free, leaves no stains, cleans up quickly, has low ash content, and is safe for disposal by incineration. Kadant granTek Inc.: 919-562-0225. Tech Contact: Michael Devic works in -60 to +450°F temps Bonding to similar and dissimilar substrates, Type EP13 single-component epoxy adhesive requires no mixing and has unlimited working life at room temperature. It exhibits www.ieninfo.com/11224 -252 or circle 252 on card dimensional stability, is 100% reactive, and does not contain any solvents or diluents. Applied to vertical surfaces without sagging or dripping, adhesive cures within 60 to 90 min at temperatures of 300 to 350°F. Readily machinable epoxy, upon cure, exhibits tensile shear strengths in excess of 3,500 psi. Master Bond Inc.: 201-343-8983. Tech Contact: Robert Michaels www.ieninfo.com/11224 -249 or circle 249 on card Hydraulic System Monitoring Unit incorporates optical sensor Testmate Monitoring Unit measures solid particle contamination in hydraulic systems; measurement accuracy is ±1/2 ISO code. It has automatic measurement and display of cleanliness ratings as ISO 4406:1999, SAE AS 4059, and NAS 1638. Unit has viscosity range of 46 to 1,622 SUS and measures particles whose sizes are greater than 4 to 21 microns. Integrated pump and hose with test point connections allow operation on reservoirs, control circuits, and highpressure circuits. Schroeder Industries: 800-722-4810; 724-318-1118. Tech Contact: Stephanie Kuruce www.ieninfo.com/11224 -250 or circle 250 on card www.ieninfo.com/11224 -253 or circle 253 on card http://www.ieninfo.com/11224-251 http://www.ieninfo.com/11224-252 http://www.ieninfo.com/11224-251 http://www.ieninfo.com/11224-252 http://www.ieninfo.com/11224-249 http://www.ieninfo.com/11224-249 http://www.ieninfo.com/11224-250 http://www.ieninfo.com/11224-253 http://www.ieninfo.com/11224-253 http://www.ieninfo.com/11224-253 http://www.ieninfo.com/11224-250
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.