IEN - March 2009 - (Page 31) page 31 IeN / March ’09 AC Drive can be stacked For 1/8 to 25 hp motors, Series V1000 employs maintenance monitors to ensure drive’s health, online tuning to maintain harmony with motor, and application presets to speed installation. EN954-1 Safety Cat 3 safety input enables disconnection of motor at first sign of trouble. RoHScompliant drive can save up to 72% of energy use in HVAC air handling duties. Yaskawa electric america, Inc.: 800-927-5292 www.ieninfo.com/11224 -417 or circle 417 on card side-by-side Linear Actuator Resource Ceramics Center Precision 2500 °F measures 80 x 48 mm For single- and multiaxis linear automation systems, Model MKUVS32-KGT has maximum stroke of 1,022 mm with single-piece support rail length of 1,100 mm. It enables travel speeds up to 1 m/sec and accelerations of up to 30 m/s2. Unit features Large stock of machinable ceramics and custom parts fabricated to print. Full catalog available! AREMCO www.aremco.com e-mail: aremco@aremco.com AREMCO PRODUCTS, INC. 707-B Executive Boulevard Valley Cottage, NY 10989 Tel 845-268-0039 Fax 845-268-0041 Main_miniSpace07 -427 or circle 427 on card www.ieninfo.com/11224 1/16/07 11:13 AM Page In-Process Tool verifies proper mold position To prevent mistakes caused by inaccurate mold repositioning, TolTec Microimage Measurer verifies accuracy of mold measurements and checks surface finish during moldmaking process while mold is still in place on EDM or milling machine. It also accelerates production by eliminating routine of removing, measuring, and relocating molds. Measurements are taken and recorded from machine’s CNC controller, allowing operator to check X-Y tolerances on-the-fly. Mc Machinery Systems, Inc.: 888-297-9895 www.ieninfo.com/11224 -418 or circle 418 on card support rail, 1 or 2 carriages, and high-precision ball screw drive with maximum spindle speed of 3,000 rpm. User can also specify pitch values of 2, 4, 10, or 20 mm. Schaeffler group USa Inc., INa Linear Technology Div.: 864-583-4541 www.ieninfo.com/11224 -421 or circle 421 on card www.ieninfo.com/11224-424 www.ieninfo.com/11233 -487 or circle 487 on card 424 MiNi WITH SPACE TELESCOPIC CYLINDERS offered with guide rails and end caps FIFO System is With guide rails attached to floor serving as fixed tracks, FIFO station helps to standardize material supply and ADVANTAGES � AIR OR HYDRAULIC � 6” TO 60” STROKES � 2 TO 4 STAGES BiG Avoiding scratches, dings, and related costs, plastic No-Mar gap gauges come in 4 series: short, go/no-go short, long, and go/no-go long. Go/no-go series is used to check gaps at location where only one gap with one tolerance spread is needed. Thickness sizes begin at 1/4 mm (0.01), 1/2 mm (0.02) and progress in 1/2 mm increments through 6 mm. Gauges can be arranged in any order and are used in auto and aviation assembly plants. production Tool co.: 888-487-9002; 330-425-4466 www.ieninfo.com/11224 -419 or circle 419 on card Gap Gauge won’t damage parts ensure transparent operating sequences. It supports 5S principles––sort, straighten, shine, standardize, and sustain––for material supply. Aluminum profiles integrated into guide rails enable customized application options. Bosch rexroth corp., Linear Motion & assembly Technologies (MI): 800-7397684; 269-697-5295. Tech Contact: Kevin Gingerich www.ieninfo.com/11224 -422 or circle 422 on card E-mail: info@ramsco-inc.com www.ieninfo.com/11224-425 or circle 425 on card BOX 159 , WYCKOFF, NJ 07481 201-447-1589 • Fax: 201-447-0302 AIR & HYDRAULIC POWER INC www.ieninfo.com/11224-428 or circle 428 on card www.ieninfo.com/11224-429 or circle 429 on card skewed 5-slot armature Brush DC Servomotor with Measuring 22 mm dia, Series 6000 comes in lengths of 1.901, 1.556, and 1.256 in. with continuous torque of 2, 1.3, and 0.8 oz-in., respectively. Depending on model, brushcommutated motors with bonded neodymium iron boron magnets can generate max peak torque to 10.2 oz-in. with nominal no-load speeds to 8,720 rpm. Motors include sintered bronze bearings, 2-pole stators, heavy-gauge steel housing, silicon steel laminations, and copper graphite brushes. aMeTeK Technical & Industrial products: 330-673-3452. Tech Contact: Shannon Booth www.ieninfo.com/11224 -420 or circle 420 on card Microterminal with prompt-andresponse functionality Model B in CTM Series of serial microterminals monitors and controls machines and equipment manufactured by OEMs. It specifically displays informational prompt to operator and collects operator’s response on numeric or alphanumeric keypad. Model is backwards-compatible with legacy versions and may be used as drop-in replacement throughout various applications. Intelligent Instrumentation, Inc.: 800-685-9911; 520-2952077. Tech Contact: Paul Liska www.ieninfo.com/11224 -423 or circle 423 on card Fast, Cost-Effective, Flexible Construction www.ieninfo.com/11224 -426 or circle 426 on card Inquire Online: IENinfo.com Plant Offices Equipment Enclosures Guard Buildings 800-345-4400 Fax:888-432-9274 www.ieninfo.com/11224 -430 or circle 430 on card www.a-wall.com Clean Rooms CMM Enclosures Temp./Humidity Rooms http://www.ieninfo.com/11224-424 http://www.ieninfo.com/11224-417 http://www.ieninfo.com/11224-427 http://www.ieninfo.com/11224-421 http://www.ieninfo.com/11224-427 http://www.ieninfo.com/11224-427 http://www.ieninfo.com/11224-417 http://www.ieninfo.com/11224-424 http://www.ieninfo.com/11224-424 http://www.ieninfo.com/11224-418 http://www.ieninfo.com/11224-421 http://www.ieninfo.com/11224-418 http://www.ieninfo.com/11224-428 http://www.ieninfo.com/11224-422 http://www.ieninfo.com/11224-425 http://www.ieninfo.com/11224-425 http://www.ieninfo.com/11224-419 http://www.ieninfo.com/11224-425 http://www.ieninfo.com/11224-428 http://www.ieninfo.com/11224-429 http://www.ieninfo.com/11224-419 http://www.ieninfo.com/11224-429 http://www.ieninfo.com/11224-422 http://www.ieninfo.com/11224-430 http://www.ieninfo.com/11224-426 http://www.ieninfo.com/11224-420 http://www.ieninfo.com/11224-426 http://www.ieninfo.com/11224-426 http://www.ieninfo.com http://www.ieninfo.com/11224-430 http://www.ieninfo.com/11224-420 http://www.ieninfo.com/11224-423 http://www.ieninfo.com/11224-430
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.