Printed Circuit Design & Fab - April 2008 - (Page 42) FIGURE 5. Integrated passive network with integrated passive devices and thin-film buildup passive elements (source: Fraunhofer-IZM). Combining these technologies into SiP devices provides a mechanism for cost-effective functional diversification. These technologies enable SiP to provide the necessary continuous increase in functional density and decrease in cost per function. Market demands will result in the integration of more components (e.g. passives, MEMS, optical and even bio components) into a single package. The long-term vision for SiP is the optimized heterogeneous integration of wireless, optical, fluidic, bio elements/interfaces, as well as integrated shielding and heat sinks. This goal requires new materials and control of their interactions on the micrometer and nanometer scale. Numerous concepts for 3-D SiP packaging are emerging, driven largely by the demands of portable consumer products. One of the most important is wafer-level packaging. WLP is an emerging technology, used for both single-chip packaging and SiP, where all elements of a package are within the boundary of the die and all packaging processes performed prior to wafer singulation into individual circuits. WLP development was motivated by the recognition that WLP technology (i.e., parallel processing on the wafer) addresses the need to increase performance and functionality, while reducing system size, power and cost. WLP technology with and without a redistribution layer (RDL) is used for a variety of products where the small size, thickness and weight are important product differentiators. This technology will provide significant cost reductions as it matures and production volume increases. The combination of WLP and wafer/die stacking approaches leads to a large number of variations in WLP technology used for SiP. The highest levels of integration are achieved through 3-D packaging. Die stacking has been used for consumer products (such as cellphones) for several years, with wire bonding used to connect the stacks to the package substrates. An important new technology is through-silicon vias, which allow more efficient die stacking and 3-D integration. These developments lead to more complex packages for both single and multi-die WLPs (FIGURE 4). The use of TSV as a base for SiP requires solutions for both the thermal density associated with a “cube” of transistors (rather than the planar array of traditional CMOS) and the incorporation of passive devices required for system-level integration. Prototypes have been developed addressing both requirements. Microfluidic components with a form factor suitable for lamination into a device stack with TSV interconnect have been fabricated. Passive 42 networks have also been fabricated that are compatible with TSV interconnected die stacks (FIGURE 5). Innovations in SiP and WLP technologies depend on the integration of progress in the integration of materials and equipment made in all segments of the industry. The successful integration of all of these elements provides a rich portfolio of capabilities in the era of “more Moore” (continued CMOS scaling) and “more than Moore” (the addition of functional diversification). Some of these advanced packaging elements include: ■ New materials such as nanoparticles to lower processing temperatures and nanotubes for improved thermal and electrical conductivity. ■ High-density, low-cost packaging substrates. ■ Wafer thinning, singulation and handling. ■ Embedded and integrated passives and actives. ■ Co-design tools. ■ Equipment for advanced packaging. Innovations in SiP have been accelerating, as this technology becomes a major enabler for a large class of products in the consumer-driven marketplace. Many issues remain that require continued research and development. Today we have not proven the reliability of package-level system integration for complex systems; we do not have a proven strategy for repair and rework of SiP-based products; and we have not resolved the test access and test contactor challenges associated with the high frequency of future devices that will exceed 15 GT/s. As 3-D SiP packaging architectures evolve, advanced codesign tools linked with modeling and simulation capability must be in place to facilitate an effective collaborative environment between system, device and packaging engineers. New materials must be developed to meet the requirements of these new SiP architectures and for meeting (changing) environmental regulatory requirements. As an integrator of components and technologies from different areas, SiP will become the primary architecture for high-value, system-level products for consumer products, before proliferating into products in all major market segments. PCD&F DR. W.R. (BILL) BOTTOMS is chairman and CEO of NanoNexus (nanonexus.com) and chairs the Packaging Technology Working Group (TWG) for the iNEMI Roadmap and the ITRS Roadmap for Assembly and Packaging; wbottoms@ nanonexus.com. APRIL 2008 PRINTED CIRCUIT DESIGN & FAB http://nanonexus.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.