2007 Master Catalog - (Page 143) LIVE CHAT! Click Here Modular Segmented Vacuum Manifold Ideal Applications: • Pick and place • Robotic assembly • Material handling Mid Series Segmented Vacuum Manifolds Segmented Manifold Series: VMS Features/Benefits: • Precise control – control both the vacuum and the blow-off duration time. • Fast response – no delay due to long plumbing lines; installs close to vacuum point • Instantaneous vacuum as needed – minimal air consumption • High productivity – cycle rates up to 2700/min • Reliable, trouble-free operation ~ No moving parts to wear ~ No flap valves to stick open ~ No downtime ~ No filters required VMS3A-90H-1-1-1-0 Click Here Standard Manifolds: The VMS Mid Series Segmented Vacuum Manifolds are individual vacuum segments with a common air supply that provides independent vacuum to multiple locations. Segments can be individually configured or they can all be the same. All segments offer integral NC solenoid control for vacuum creation. For added functionality, specify a valve for blow-off and a vacuum switch/sensor for part present/vacuum achieved feedback. Design flexibility is further increased with our interchangeable venturi cartridge system that allows designers to optimize performance by choosing from 11 venturi cartridges. (see page 7). Large internal flow paths allow ingested debris to pass through the segments without clogging. Push-to-connect air supply and vacuum lines save space and assembly time. Performance Level Designations: “L” 0-10"Hg, [0 to 339mbar] for low vacuum/high flow applications “M” 0-20"Hg, [0 to 677mbar] for medium vacuum/high flow applications “H” 0-28"Hg, [0 to 948mbar] for high vacuum/standard flow applications Segmented Manifold Options: • Interchangeable Venturi cartridges – 11 different performance levels • Miniature vacuum switches/sensors for reliable part detection/optional quick disconnects • On-board integral control valves – 24vDC or 110vAC • Choice of operating pressures to meet machine and factory air supply 80 PSI [5.5 BAR] standard, 60 PSI [4.0 BAR] optional. Eliminate the Guesswork: Contact Us! Vacuum technology isn’t an exact science. To ensure proper product selection, Vaccon offers free application engineering assistance, a 30 Day Test & Evaluation Program or you can send sample products to our in-house test facility and we will test and size a pump for you. To download a complete set of drawings in 13 different CAD formats, please visit our website at www.vaccon.com For more information or technical assistance, please call 508-359-7200 or 800-848-8788 or email engineering@vaccon.com Phone: 1-800-848-8788 or 508-359-7200 E-Mail: engineering@vaccon.com 143 Vacuum Manifolds Flexible automation – Four, six station manifolds control an End-ofArm Tool that configures different zones of cups to handle a wide variety of stamped metal parts. No tool change required. Configurator, CAD Drawings, and On-line Store https://www.websitealive5.com/2126/rLogin.asp?groupid=2126&websiteid=0&departmentid=0&sessionid_=36&loginname=&loginemail=&loginquestion=&infocapture_ids=&infocapture_values=&dl http://www.vaccon.com/VMS-home.aspx http://www.vaccon.com http://www.vaccon.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.