Best Practice Guide for Warehouses 2008 - (Page 12) WAREHOUSE Storage BUILDINGS W-WA1.0 Warehouse Area: occupancy sensing • individual luminaire control Control Needs Automatically turn lights on and off based on occupancy; detect forklift operation Individual luminaire control Night lights on all of the time Night lights operate during power outage Solution PIR occupancy sensors (HB series) Application Description Space Use: Dimensions: Ceiling Height: Windows: Skylights: Bulk & Rack Storage Bulk Storage 50’ x 50’ Rack Storage 12’ x 160’ Bulk & Rack Storage 35’ None None Line voltage sensor mounted to each luminaire Night lights are not controlled Power from emergency panel Lighting Pendant-mounted turret industrial fluorescent luminaires with 15% uplight, 8’ long, using six T8 fluorescent lamps and tandem-wired two-lamp 277-volt electronic ballasts. Luminaires are mounted 32’ above finish floor. Bulk & Rack Bulk Storage Partial Lighting Plan Rack Storage Partial Lighting Plan Design Solution Description Each luminaire is individually controlled using a 277-volt HB350-B PIR occupancy sensor mounted to the end of the luminaire. Sensors in the Bulk Storage area use an HBL4 360° lens; sensors in the Rack Storage area use an HBL1 aisleway lens with a long and narrow field of view to detect forklifts in time to turn lighting on. Night light luminaires are not controlled and remain on at night and during a power outage. Code Compliance Guide ASHRAE IECC TITLE 24 1999 2003 2005 2001 2004S 2004 2006 12 Watt Stopper/Legrand W-WA1.0 0508
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.