Best Practice Guide for Warehouses 2008 - (Page 31) WAREHOUSE Installation Notes BUILDINGS Bulk 1. Mount the HB300-B on the end of the luminaire using the HBEM3 extender module. 2. Recommended time delay is factory preset at 10 minutes. 3. Mount the sensor so that the lens is at the same height, or slightly below, the bottom of the fixture so it is not blocked by the fixture housing. Mount all sensors at the same height above the finish floor. 4. Confirm night light / egress lighting requirements with local code officials. Equipment Schedule Catalog No. HB300-B HBL1 Qty as shown 1 per rack storage sensor 1 per bulk storage sensor 1 per sensor as shown as shown Description & Passive infrared occupancy sensor and control module, 24 VDC, with integral back box Aisleway lens Rack HBL4 360° lens HBEM3 HBAA-1 BZ-100E-P Extender module Knuckle adjustment (used on ends of aisles) Power pack, 120/277 VAC, 60 Hz Storage www.wattstopper.com • 800.879.8585 www.wattstopper.com • 800.879.8585 W-WA3.0 0508 31 http://www.wattstopper.com http://www.wattstopper.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.