Best Practice Guide for Warehouses 2008 - (Page 71) WAREHOUSE Installation and Wiring Details DW-200 Installation BUILDINGS Conference DW-200 Wiring Diagram Room Installation Notes 1. Install DW-200 dual relay wall switch next to door facing conference table to provide a full view of the room but not out the door. 2. The DW-200 is shipped with a factory preset time delay of 15 minutes and with the PIR sensitivity setting at maximum. Ultrasonic sensitivity is factory preset at approximately 75%. Refer to installation instructions if adjustments are necessary. 3. The DW-200 is shipped with auto-on for relay 1 and manual-on for relay 2. Confirm settings with owner during installation. 4. The DW-200 is shipped with the audible warning activated. Confirm settings with owner during installation. Equipment Schedule Catalog No. DW-200 Qty 1 Description Automatic dual technology, dual relay wall switch occupancy sensor, 120/230/277 VAC, 50/60 Hz www.wattstopper.com • 800.879.8585 www.wattstopper.com •W-CR2.0 0508 800.879.8585 71 http://www.wattstopper.com http://www.wattstopper.com
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.