Waytek Catalog - (Page 35) Terminals & Connectors Wire & Cable TPA 38201 38204 38207 38210 12052641 12110293 12052848 12162144 DELPHI PACKARD METRI-PACK 150 SERIES SEALED CONNECTORS Metri-Pack 150 series in-line connectors are ideally suited for space-limited applications. With a current capacity of 14 amps and 16 volts DC, these sealed connectors can handle high demand situations along with low-energy electronic circuits. Two thru six contact assemblies, TPAs (terminal position assurance) hold the terminals firmly in the connector bodies and act as strain reliefs. CPAs (Connector Position Assurance) secures mating halves together. Triple-rib silicone seals add the confidence of a totally sealed configuration. Empty cavities must be filled with cavity plugs. Male Body Female Body TPA CPA Typical four straight contact configuration Cable dia. GPT wire SXL wire mm Gauge Gauge 2.80-2.03 18-16 20-18 Seal Color Dark red Stock No. Packard No. 39008 15324973 Contacts 2 3 4 6 Male Body Stock No. 38200 38203 38206 38209 Packard No. 12162000 12129615 12162102 12124107 Female Body Stock No. Packard No. ORDERING NOTES: 1. Select connector body style from chart. 2. One terminal for each contact location needed. 3. Pick cable seal by wire gauge. 4. Cavity plugs are required for all unused pin locations. 5. Metri-Pack crimping tool must be used to assure a good seal. These connector bodies are straight (in a row) except 6 contact body which is two rows of three. Cavity Plug Stock No. 39011 (Packard No. 12059168) CPA (Shown above) Clamps & Clips Terms & Conditions/Index Wire Coverings Heat Shrink Products Tapes & Chemicals Wire Markers Protection Products Terminals Wire Gauge 18-16 Stock No. 38230 (Packard No. 12020833) Fits 3, 4 and 6 contacts Female Male Terminal Reel Stock No. Stock No.* 31076 31076R Packard No. 12045773 Female Terminal Reel Stock No. Stock No.* 31077 31077R Packard No. 12048074 Recommended Packard Tool 509 *Terminals available on reels; order by Stock No. specified in table above. Special tooling needed for use of reels not available from Waytek. Male The Metri-Pack 150 Series sealed electric header is a rugged system designed for severe underhood environments. Offered in 18 or 30 pin configurations. Ideally suited for critical, low energy electronic applications which require protection from environmental hazards. TPA Contacts 2 3 4 6 Sealed Electric Headers Stock No. 38202 38205 38208 38211 Packard No. 12052634 12052845 12047948 12052850 Color Blue Natural Black Gray Contacts 18 30 Female Body Stock No. Packard No. 38219 38221 15492546 15492452 Pull to seat 18-16 ga. female terminal for 38219 and 38221. Stock No. 31091 These connector bodies are in rows of three. METRI-PACK CRIMPING TOOLS Hand Tool Stock No. 474 Crimps 12 gauge wire, terminal and cable seal in separate operations. Hand Tool Stock No. 509 Crimps 20 through 14 gauge male and female terminals in the Metri-Pack 150 and 280 series. Ratchet assembly assures a perfect crimp every time. Universal Metri-Pack Terminal Removal Tool Stock No. 422 This tool removes Metri-Pack socket and pin terminals from the connector bodies. May be used with the 150 series and the 280 series. 24 Hour FAX: 1-800-858-0319 email: sales @waytekwire.com ® ® 35 Cable Ties Circuit Protection Cable Seals Connector Bodies Wiring Accessories Assembly instructions on page 33. Terminals & Connectors
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.