Waytek Catalog - (Page 43) Terminals & Connectors Wire & Cable AMP UNIVERSAL MATE-N-LOK® CONNECTORS A recognized standard in the industry, these connectors are universal because the pin and socket terminals may be intermixed in the same housing. The plug and cap lock together positively and completely enclose the terminals. The housings are nylon, natural color and the terminals are brass, pre-tinned. Contacts are on a .250 in. spacing. UL recognized, CSA, 600 volt AC or DC. 15 amp maximum rating, dependent on operating temperature and the number of circuits. For a completely sealed connection, use the interface seals and wire seals. This economical splash proof/immersible sealed connector system can be used with existing applications utilizing Universal MATE-N-LOK connectors. Each connection uses two wire seals and one interface seal. The sealing plug is used to seal unused circuits. Primary application is for wire-to-wire. One through 15 contact assemblies available. Assembly Contact Cavity Wire Seal Mating End Pin Contact Interface Seal Cap Housing Silos Back Side (Wire End) Connector Bodies Contacts 1 2 3 4 5 6 9 12 15 Terminals Protection Products Terms & Conditions/Index Wire Coverings Heat Shrink Products Tapes & Chemicals Wire Markers Cap Housing Stock No. AMP No. 38151 38152 38153 38154 38155 38156 38159 38162 38165 1-350868-0 1-480699-0 1-480701-0 1-480703-0 1-480764-0 1-480705-0 1-480707-0 1-480709-0 1-480711-0 Plug Housing Stock No. AMP No. 38101 38102 38103 38104 38105 38106 38109 38112 38115 1-350867-0 1-480698-0 1-480700-0 1-480702-0 1-480763-0 1-480704-0 1-480706-0 1-480708-0 1-480710-0 Interface Seals* Stock No. AMP No. --39102 39103 39104 --39106 39109 39112 39115 --794269-1 794271-1 794273-1 --794275-1 794277-1 794279-1 794281-1 Wire Seals* Stock No. AMP No. --39152 39153 39154 --39156 39159 39162 39165 --794270-1 794272-1 794274-1 --794276-1 794278-1 794280-1 794282-1 Socket Stock No. 31071 (AMP #350550-1) 20-14 ga. wire ORDERING NOTES: 1. Select plug and cap housings by Stock Number. 2. One pin or socket terminal required for each contact location. 3. Tooling shown will give proper crimps and help assembly. * To prevent seals from drying and cracking, store them in a sealed bag when not in use. Pin Stock No. 31072 (AMP #350705-1) 20-14 ga. wire ASSEMBLY TOOLS Crimping Tool Stock No. 428 Will crimp many U-barrel type terminals along with Universal Mate-N-Lok. For 20-14 gauge terminals. AMP Crimping Tool Stock No. 427 The Pro-crimper® II hand tool requires dramatically less hand force than standard crimpers to produce high quality crimps. Ratchet construction assures a complete cycle every time. Crimps MATE-N-LOK pin and socket contacts for 20-14 gauge. Contact Insertion Tool Stock No. 425 For inserting contacts applied to small diameter wire. Contact Extraction Tool Stock No. 534 For removing sockets or pins from the connector bodies. 24 Hour FAX: 1-800-858-0319 email: sales @waytekwire.com ® ® Clamps & Clips Sealing Plug Stock No. 39150 (AMP No. 770377-1) Plug Housing 43 Cable Ties Wire Seal Circuit Protection Wiring Accessories Terminals & Connectors
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.