Waytek Catalog - (Page 55) Wiring Accessories Wire & Cable PUSH BUTTON SWITCHES Momentary Start Switch Switch Stock No. 44047 Stem 3/4" long, 5/8" diameter. Two #8 screw contacts. Optional weather and dustproof boot available. Rated for 15 amps at 12 volts. Normally open. Momentary Start Switch Stock No. 44049 Stem 5/8" long, 5/8" diameter. Rated for 60 amps at 12 volts, 40 amps at 24 volts. Flush silver contact screws in molded insulator. Normally open. Switch Boots Weather and dustproof neoprene rubber switch boot. Can be used for both Momentary Start Switches 44047 and 44049. Black Stock No. 44053 Red Stock No. 44054 Momentary Start Switch Collar Stock No. 44055 Protective Collar - Safety Bezel for use with Momentary Start Switches 44047 and 44049. Momentary Master Push Button Switch Stock No. 44006 For controlling apparatus that requires temporary power and manned operation. Heavy duty momentary push switch with water resistant cover; 16 amps at 12 volts. Normally open. Compact Momentary Push Button Switch Stock No. 44005 Two #6 screw contacts. Rated up to 15 amps at 6 volts or 10 amps at 12 volts. Normally open. Horn button Stock No. 44003 Black plastic button, nickel plated housing. Mounting holes 21/8" on center. Two #6 screw contacts. Normally open. Door Switch Stock No. 44007 Plunger style door switch has self tapping threads, includes mating connector with three 8” 18 ga wire leads. 14 volts at 10 amps. Normally open. Stock No. 44021 Mushroom Head Push Button Stock No. 44024 Mounting Adapter sold separately Made of aluminum and zinc alloy. Typically used as an E-Stop Switch. Order the following components to complete E-Stop assembly: ORDERING NOTES: 1. Order by Stock Number and quantity required. Stock No. 44022 Stock No. 44027 Stock No. 44023 Mounting Adapter E-Stop Disc ® 24 Hour FAX: 1-800-858-0319 email: sales @waytekwire.com ® Terms & Conditions/Index Typical finished assembly Wire Coverings Heat Shrink Products Selector Switch Stock No. 44025 Made of polyamide and polycarbonate. Includes Mounting Adapter Contact elements snap onto the mounting adapter and are keyed to ensure proper alignment. Up to 4 contacts can be fitted on the mounting adapter for each operator - 2 stacked on either side. Contact elements are stackable depending on control station enclosure/panel depth. Recommended maximum stack is 2 deep. Control station enclosures fit one contact element deep. Tapes & Chemicals Rugged, reliable switches that allow for easy installation. Modular construction with rear panel locking screws on mounting adapter. Operating temperature -13°F to +140°F (-25°C to +60°C). Rated 3 amps at 24V DC and 6 amps at 120V AC. Parts sold separately. Selector switch and momentary start push button operators come with mounting adapter. Mushroom head operator does not come with mounting adapter. Create an assembly: 1. Select a Control Station Enclosure Available in 1-hole, 2-hole and 3-hole enclosures. 4-hole and 5-hole enclosures available on special order. Stock No. 44020 Weather resistant, IP65 rated. 2. Choose an Operator Momentary Start Push Button Stock No. 44026 Made of polyamide and polycarbonate. Includes Mounting Adapter 3. Choose Contact Elements Stock No. 44018 Normally Closed Red Stock No. 44019 Normally Open Green Wire Markers Protection Products E-STOP PUSH BUTTON & SELECTOR SWITCHES , Clamps & Clips 55 Cable Ties Circuit Protection Wiring Accessories Terminals & Connectors
For optimal viewing of this digital publication, please enable JavaScript and then refresh the page. If you would like to try to load the digital publication without using Flash Player detection, please click here.