Waytek Catalog 227 - 96

BACK-UP ALARMS
* Medium duty
* 3' 18 ga wire lead connections
* Steam cleanable/pressure
washable
* Meets State, Federal and U.S.
Army Corps of Engineers'
requirements

Clamps & Clips

HORNS
* CE & E-mark Certified for EMC
* Voltage spike and reverse
polarity protected
* Compact size for horizontal or
vertical mounting in protected
areas

* Offered in the novel fanfare

* Corrosion resistant and

style for 12V and the
mini-disc style for 24V
* Compact size for tight
mounting conditions
* Mounting bracket

waterproof

* Electrical contacts are

standard 1 ⁄ 4" blade terminals
* .3165" dia. hole on fanfare
styles

12 V

12-24V
.3A
SAE
J994-Type C

SAE
J994-Type B

Wire Coverings
& Protection

Terminals &
Connectors

Wire &
Cable

Switches & Relays

24 V
Stock No. 48019

Mini-Disc Horn

2 slots .75"L x .25"W slots on 3.25"
centers

Stock No. 48054

* Low pitch (335 Hz)

* Low pitch (400 Hz)

Stock No. 48063

Stock No. 48055

* High pitch (435 Hz)

on 3.25" centers

Mini-Fanfare Horn

Stock No. 48062

Stock No. 48020

* 107db at 4'
* 97 db at 4'
* Compact Size: 4"W x 2.5"D x 3"H * Compact Size: 4"W x 1.25"D x 2.5"H
* Mounting: 2 slots .5"L x .25"W and * Mounting: 4 slots .5"L x .25"W slots

* High pitch (500 Hz)

Heat Shrink
Products

Tapes &
Chemicals

Tools

ENGINE START/ENGINE STOP MOMENTARY SWITCHES
Back-up Alarm Switch
Stock No. 48022

* For vehicles without

an automatic back-up
switch circuit
* Mount adjacent to
reverse switch
* Spring loaded lever
permits over-travel
* Normally off

imprint, white on color

* Repels oil, water and other liquids
* 2 7 ⁄ 32" L x 1 1 ⁄ 8" D (56.1mm x 28.5mm)

* Available in 1-hole, 2-hole and
3-hole enclosures
We
* Weather resistant, IP65 rated

NEW

Switches
& Relays
Battery
Management
Fuses &
Circuit Breakers

* With red

'Start' button

2. Choose an Operator

'Stop' button

3. Choose Contact Elements

Momentary Start
Push Button
Stock No. 44026

Stock No. 44018

* Rugged, reliable switches that
allow for easy installation

* Normally closed

* Made of polyamide
and polycarbonate
* Includes Mounting
Adapter

* Modular construction with

Red

rear panel locking screws on
mounting adapter
* Parts sold separately

Stock No. 44019

* Normally open

Selector Switch
Stock No. 44025

140°F (60°C)
-13°F (-25°C )

Green

* Made of polyamide
Stock No.
44148

Stock No.
44149

* Contact elements snap onto

* Includes Mounting
Adapter

E-Stop Push Button
Stock No. 44024

* Made of aluminum
and zinc alloy

Cable Ties

Stock No. 44158

* With black

Create an assembly:

and polycarbonate

96

Stock No. 44157

E-STOP, PUSH BUTTON & SELECTOR SWITCHES
1. Select a Control Station
Enclosure

Lights &
Accessories

* Die-cast housing, with knurled aluminum face nut
* Two screw terminals with lock washers
* Mounting stem 7 ⁄ 8"-24 thread
* Keyed to prevent switch from turning
* Fits panels .04" - .10" thick (1.0 - 2.5mm)
* Impact-resistant molded plastic button with

8A

* Mounting Adapter sold separately
* Typically used as an E-Stop Switch
* Order the following components
to complete E-Stop assembly:

Stock No.
44150

Stock No.
44151

* 4-hole and 5-hole enclosures
available on special order

24V
3A

120VAC
6A

Typical ﬁnished assembly

Stock No. 44023

E-Stop Disc
Call 800-328-2724 for details.

Stock No. 44027

the mounting adapter and are
keyed to ensure proper
alignment
* Up to 4 contacts can be fitted
on the mounting adapter for
each operator - 2 stacked on
either side
* Contact elements are stackable
depending on control station
enclosure/panel depth
* Recommended maximum
stack is 2 deep
* Control station enclosures fit
one contact element deep

Mounting Adapter
for 44024

Order On-Line: www.waytekwire.com

24 Hour FAX: 1-800-858-0319
Waytek Catalog 227

Table of Contents for the Digital Edition of Waytek Catalog 227
