Antenna Systems & Technology - Summer 2013 - (Page 22)
NEW PRODUCTS & SERVICES
Rogers Launches Laminate Material with Improved
Thermal Reliability
Rogers Corp. Advanced Circuit Materials Division has
launched the next generation of RO4360G2 laminates with improved thermal reliability for higher UL Maximum Operating
Temperatures (MOT’s).
In 2010, Rogers launched its RO4360 laminate, a high Dk RF
thermoset laminate. The RO4360G2 laminate is the next generation with improved thermal reliability that will help fabricators
achieve higher UL MOT’s. With a tailored high Dk of 6.15 at
10 GHz, this material allows next generation power amplifier
designers to meet size and cost reduction targets. Specifically,
the laminate’s higher Dk allows for a significant reduction in finished circuit board size (20 to 30 percent). RO4360G2 laminates
process similar to
FR-4, are automated assembly compatible, and offer
the same reliability and repeatability that customers
have come to expect from Rogers
RO4350B material.
UL 94V-0 flame
rating
(pending)
and fully lead-free
process capable, RO4360G2 laminates possess improved thermal
conductivity of .81 W/m/K for improved reliability, a low Z-axis
CTE for reliable plated through holes, and drill performance as
good as or better than RO4350B laminates.
Typical applications for RO4360G2 laminates are power
amplifiers, LNAs, RF components (combiners/splitters), patch
antennas, and as a replacement material for designs previously
employing LTCC (low temperature, co-fired ceramic).
CEA-Leti Wins Prize in New Materials Category for
E-Thread Technology
CEA-Leti has announced that researchers Dominique Vicard
and Jean Brun received the Avantex Innovation Prize for the use
of the E-Thread technology in textiles.
E-Thread is a microelectronic packaging technology developed by Leti that allows for a direct connection of a chip to a set
of two conductors, which can provide the functions of antenna,
power and/or data bus. This allows a 10 times improvement in
size, assembly time and reliability compared to classic microelectronic packaging. The E-Thread assembly can then be incorporated inside a yarn and used by the textile and plastic industries using standard production tools. Electronics such as LEDs, RFIDs
or sensors can then be truly integrated in materials and objects.
In choosing this technology for the innovation award, the
Avantex jury said “electronics integrated in textiles during the
textile processing and not simply by adding the components in a
last step will be a significant step forward.” The jury also said the
prize was awarded to “this development, as it shows that research
22
Antenna Systems & Technology Summer 2013
MATERIALS & MANUFACTURING
and development is
also for the textile industry of vital importance and that it can
lead to the creation of
new companies.”
E-Thread is one
of the technologies
used within the European FP7 PASTA
project
(Platform
for Advanced Smart
Textile Application), and is the key technology asset of the Primo1D startup company, that will be created by Leti during the
second half of 2013.
RFMW 24 GHz RF Absorber from
MAST Technologies
RFMW Ltd. has announced design and sales support for a
new line of microwave absorbing materials from MAST Technologies. These “tuned frequency” absorbers are electrically optimized for specific applications and intended for customers who
experience high frequency cavity resonance effects or high frequency EMI emissions above 18 GHz. Proper application of the
absorber eliminates these unwanted signals. This durable elastomeric material is flexible and will not crack, even in outdoor
environments. Halogen free and RoHS compliant, the material
is electrically non-conductive and can be placed in direct contact with electronic
circuits.
MAST
model
number
MR11-0041-00 is
tuned for absorption at 24 GHz.
The reflectivity vs.
frequency graph
shows the quality performance of
this material. Additional standard absorption frequencies are available and MAST has the ability to customize the
material to specific, application dictated frequencies. MAST absorber material is available with or without a pressure sensitive
adhesive (PSA) backing. Standard sheet size is 24 by 24 inches
and 12 by 12 inch sheets are available.
Send New Products and Industry News to Heather Krier at
HeatherK@WebcomCommunications.com
www.AntennasOnline.com
http://www.AntennasOnline.com
Table of Contents for the Digital Edition of Antenna Systems & Technology - Summer 2013
Antenna Systems & Technology - Summer 2013
Editor’s Choice
DAS Applications: Achieving Faster Data Throughput & Maintaining Optimal Connectivity in Challenging In-Building Environments
Antennas
AISG Solutions for Remote Electrical Tilt Antennas and Tower Mounted Amplifiers
Case Study: Simulating Stealth Antenna Patterns
Components/Subsystems
Materials/Manufacturing
Software/System Design
Test & Measurement
Marketplace
Industry News
Antenna Systems & Technology - Summer 2013
https://www.nxtbook.com/nxtbooks/webcom/ast_2017winter
https://www.nxtbook.com/nxtbooks/webcom/ast_2016fall
https://www.nxtbook.com/nxtbooks/webcom/ast_2016summer
https://www.nxtbook.com/nxtbooks/webcom/ast_2016spring
https://www.nxtbook.com/nxtbooks/webcom/ast_2016winter
https://www.nxtbook.com/nxtbooks/webcom/ast_2015fall
https://www.nxtbook.com/nxtbooks/webcom/ast_2015summer
https://www.nxtbook.com/nxtbooks/webcom/ast_2015spring
https://www.nxtbook.com/nxtbooks/webcom/ast_2015winter
https://www.nxtbook.com/nxtbooks/webcom/ast_2014fall
https://www.nxtbook.com/nxtbooks/webcom/ast_2014summer
https://www.nxtbook.com/nxtbooks/webcom/ast_2014spring
https://www.nxtbook.com/nxtbooks/webcom/ast_2013winter
https://www.nxtbook.com/nxtbooks/webcom/ast_2013fall
https://www.nxtbook.com/nxtbooks/webcom/ast_2013summer
https://www.nxtbook.com/nxtbooks/webcom/ast_2013spring
https://www.nxtbook.com/nxtbooks/webcom/ast_2012fall
https://www.nxtbook.com/nxtbooks/webcom/ast_2012spring
https://www.nxtbook.com/nxtbooks/webcom/ast_2011winter
https://www.nxtbook.com/nxtbooks/webcom/ast_2011fall
https://www.nxtbookmedia.com