Electronics Protection - September/October 2013 - (Page 21)

Thermal rather than cracking or shrinking under stress. Other benefits to using this material include its easy 1:1 mix ratio, its relatively quick and air-free cure, and its ability to cure in deep sections beyond 1 to 2 inches). In a world increasingly concerned with the reduction of toxic chemicals and the expense of shipping them, 20-1650 has the advantage of being solvent free so it is safer to handle than many potting systems and is non-regulated for shipping. more clips, or two extrusion halves back-to-back with any clip configuration needed to mount the TO package devices. For unique solutions requiring more devices, Ohmite can provide custom lengths for additional mounting space. Heat sinks and clips can be purchased individually, or designers can opt for Ohmite to assemble a fully customized system with customer specified components. Ohmite Manufacturing Releases C40 Heat Sink System Oven Industries has introduced the 5R1-1400 AC Temperature Controller with the integrated potentiometers, or via a PC through the TTL level UART Communication port. This compact design measuring two and one half inches square can deliver up to 15 AMPS of load current from a zero voltage switched, low noise solid state relay. Operator safety is achieved with 1 KV of AC line power isolation for the communication port and sensor input. Specifications include input voltage of 85 to 265 VAC at 50/60Hz, temperature resolution 0.1°C and ambient temperature operation is -20° to 70°C. The 5R1-1400 features integrated potentiometers for set temp and PI control, and PC programmable set temp and PID control. Additional features include a TTL level UART communication port, a set temperature range determined by thermistor type and open sensor protection. Ohmite Manufacturing has release the C40 heat sink system with modular cooling benefits. Designed to provide engineers with a variety of cooling options, the C40 heat sinks feature flexible board mounted modular assembly that can be used in conjunction with up to four TO-247 and TO-264 power resistors, or similarly packaged passive and active components. Well suited for a wide variety of industries, these 58 mm heat sinks can be used individually or in compact paired configurations. Patented camming clips secure the devices in place without the need for holes or screws. In order to create active cooling and enhance their thermal capacity in back-to-back paired operations, the C40 heat sinks include pre-configured mounting holes to accommodate a standard 40 mm by 40 mm fan. Customers have the option of a single extrusion with one or New AC Temperature Controller Released by Oven Industries September/October 2013 www.ElectronicsProtectionMagazine.com 21 http://www.thermalnews.com/conferences http://www.thermalnews.com/conferences http://www.ElectronicsProtectionMagazine.com

Table of Contents for the Digital Edition of Electronics Protection - September/October 2013

Geist Unveils Rapid Deployment Data Center Environmental Monitoring System
Enabling Effective Thermal Management with DCIM
Predicting Gasket Performance: SE Measurements with a TEM Cell to Study Gasket Reliability
Rack Containment 101
The Nine Core Elements of DCIM
Using Electronic Locking Solutions to Secure Enclosures and Meet Storage Compliance Needs
Hammond’s HJ Series Ticks All the Boxes
Rogers Introduces Poron SlimGrip Foam
Ferrite Suppressors Clear Interference
Fujipoly Thermal Sheets are a Cooling Influence on LED Lighting
GE Introduces TLE Series UPS Platform
Gore PolyVent XL Improves Reliability of Large Outdoor Enclosures
IMI Sensors Launches Linear Adjust Mechanical Vibration Switch
Industry News
Calendar of Events
Five Ways to Realize Server Room Profitability

Electronics Protection - September/October 2013