Electronics Protection - September/October 2013 - (Page 25)

Hardware tightened, the fastener (depending on size) will protrude 0.340 inches/8.64 mm from the top of the sheet. PEM Types PF50 and PF60 captive panel screws feature a Phillips recess as standard to enable the captive screws to be tightened or loosened simply using a Phillips screwdriver. (A Torx recess can be specified.) Their large heads (knurled or smooth knobs, depending on type) further allow for operation by hand without tools. These steel fasteners install in aluminum or steel panels as thin as 0.030 inches/0.8 mm and are offered in multiple screw lengths with thread sizes from #4-40 through ¼-20 and M3 through M6. They can be engineered with MAThread anti crossthread technology and can be customized with a scratch-proof DuraBlack finish. Roxtec BG Protect Utility Vaults from Lightning Strikes For wall and floor cable penetrations, the BG system is fire rated and gas-and-watertight. BG is the only multi-cable transit system certified to meet all major electrical schemes with bonding and grounding for low to high voltage applications. It is also certified for hazardous locations (Ex) and suitable for lightning protection as well as for both land-based (UL 1479) and marine applications (A and H class divisions). Roxtec BG solutions enable simple installation for floor or wall entries into fixed or pre-fabricated buildings. Only a single cut-out is required for a BG frame, allowing complete cable load installation with each cable secured and grounded to electrical standards. Maintenance teams can add or remove cables with ease, without any additional components. J.W. Winco Stainless Steel Levers Suited for Corrosive Applications Roxtec has released its Roxtec BG (bonding and grounding) system. The Roxtec BG product family is a cable entry system designed to seal large quantities of metal clad or armored cables using minimal space. When used in cabinets and enclosures the BG is proven to eliminate costs by reducing design and installation time, while also providing electrical safety and protection to people and equipment. The BG cable entry system also provides protection against weather, blast, rodents and fire. J.W. Winco, Inc. is offering its GN 300.5 Tapped Type all stainless steel adjustable levers with stainless steel components in inch and metric sizes. These RoHS-complaint hand levers are well suited wherever parts have to be clamped in a confined space or in a particular lever position. The handle is stainless steel with sand blasted satin finish. The insert, screw and spring are also stainless steel. Levers are offered in Type IS, screw with internal hexagon and Type AS, screw with external hexagon. The AS type complies with the sanitary requirement of “preventing dammed-up fluid.” September/October 2013 www.ElectronicsProtectionMagazine.com 25 http://www.ElectronicsProtectionMagazine.com

Table of Contents for the Digital Edition of Electronics Protection - September/October 2013

Geist Unveils Rapid Deployment Data Center Environmental Monitoring System
Enabling Effective Thermal Management with DCIM
Predicting Gasket Performance: SE Measurements with a TEM Cell to Study Gasket Reliability
Rack Containment 101
The Nine Core Elements of DCIM
Using Electronic Locking Solutions to Secure Enclosures and Meet Storage Compliance Needs
Hammond’s HJ Series Ticks All the Boxes
Rogers Introduces Poron SlimGrip Foam
Ferrite Suppressors Clear Interference
Fujipoly Thermal Sheets are a Cooling Influence on LED Lighting
GE Introduces TLE Series UPS Platform
Gore PolyVent XL Improves Reliability of Large Outdoor Enclosures
IMI Sensors Launches Linear Adjust Mechanical Vibration Switch
Industry News
Calendar of Events
Five Ways to Realize Server Room Profitability

Electronics Protection - September/October 2013