World Grain - March 2012 - 88

PRODUCTSHOWCASE

Pellet mill enhancement
CPM debuted at the International Feed Expo and International Poultry Expo this January a pellet mill enhancement that couples the lineator remote roller adjustment with roll speed measurement. This allows customers to monitor the speed of the rolls and provide better rollslip management to prevent plugs. The combination provides cost-efficient, higher-capacity production with the same pellet quality, and improved steam addition control with less overloads and blockage.

Perten DA 7300
Perten’s DA 7300 in-line NIR analysis system received certification from the U.S. Department of Agriculture (USDA), Dairy Grading Branch, Equipment Design Review Section that the instrument is in compliance with NSF/ANSI/3-A 14159-1-2010 Hygiene Requirements for the Design of Meat and Poultry Processing Equipment. The approval means that the instrument can be installed and used in meat and poultry facilities requiring sanitary designed instruments and equipment. Each sanitary designed instrument is delivered with a copy of the USDA certificate of compliance. The design’s certification is reviewed and renewed with the USDA every four years.

Grinding, fluting machine
ETA Automazione’s grinding and fluting numerical control four-axis machine allows for the high-speed optimization of tool engineering, reducing the running cost and improving productivity. ETA Automazione can adapt the machine for individual customer’s needs. The machine is available worldwide and is being used by some of the largest roll producers inside and outside of Europe.

Pipe system products
Jacob Pipework Systems has increased its range of series-manufactured and special products. The Universal Earthing Bridge replaces the traditional earthing cable used for the electrostatic potential equalization of pipe systems. Because the bridge is fixed to the JACOB pull-ring using screw-fixings, no welding is required for retrofitting, the company said. The new JACOB “Hygiene Distributor” is ideal when frequent cleaning of inner surfaces requires quick and easy disassembly and reassembly. The entire shaft and flap components can be removed and refitted without tools.

Electro-Sentry 1
The new Electro-Sentry 1 from Electro-Sensors Inc. is a rugged, easy-to-install and use hazard monitor for bucket elevators or conveyors. All sensor values and alarms are always displayed. Wiring, set-up and troubleshooting are simple, as no printed documentation is necessary. All programmable variables, error codes and wiring diagrams are printed directly on the enclosure or on the circuit board. The Electro-Sentry 1 includes a unique one button push-to-test that verifies proper operation of sensors, set points and alarm output relays.

Grain handling
Johnson Systems, Inc. specializes in grain handling products. It offers grain elevators, tripper conveyors, screw conveyors, troughing belt conveyors, seed cleaning, self-cleaning valves, spouting and components. Johnson Systems also offers system design and system installation. For more information, e-mail gjohnson@jsifab.com

March 2012 / World Grain / www.World-Grain.com

http://www.World-Grain.com

World Grain - March 2012

Table of Contents for the Digital Edition of World Grain - March 2012