ILMA Compoundings January 2018 - 27

Fanning shared some reasons why 3D printing is not the
concern that electric cars are for his company at this time.
He mentioned that the outputs from 3D printing are not
currently high enough to influence the market one way or
the other. Outputs will continue to improve in the future,
but he said to make the leap into mass production, 3D
printing must get through "many barriers" that are already
established for MWFs. Traditional manufacturing processes
using MWFs are already operating at a high level of efficiency, so there are more improvements needed before 3D
printing can make changes to the industry.
Fanning believes it is more likely that electric cars will
change the MWF market sooner than 3D printing. "By
2030, it's possible that half of the cars are electric," he
suggested. Fanning emphasized that electric cars require
"far fewer parts to be machined." With electric cars "you are
machining 25 percent of the parts compared to what you
were for gas-powered [vehicles]. Also, parts are composite as
opposed to sheet metal, which doesn't require machining"
he said. Fanning admits 3D printing can be a factor in the

future but feels that the impact now is most likely in the
research and development market, where it can be a convenient way to experiment with parts.

Inroads
Z. Ahmed Tahir is director of Strategy and Marketing at
Master Fluid Solutions. He says that additive manufacturing
such as direct metal laser sintering (DMLS) is "competitive
against subtractive manufacturing in smaller, complex, highly
designed and controlled, high-value applications."
"While we don't expect to see a substantial impact on our
metalworking coolant business in the immediate 5-year horizon," he added, he feels the additive manufacturing industry
"will continue to mature and make inroads into subtractive
machining." Despite this, Tahir said "both technologies as
well as other manufacturing technologies are likely to co-exist
for a significant time," and he expects his company's "other
product lines, such as corrosion and rust preventatives and
cleaners portfolio ... to benefit from this shift."

High Quality
Group II Base Oils
Our 46 million gallons of High Quality Group II base oils are
designed so your finished products will exceed the highest quality
performance levels and industry standards for API licensed
PCMO and HDEO products. They can also be used in mining
fluids, agricultural products, and all other industrial applications
as well as the manufacture of VI Improvers and explosives.
Tightly controlled NOACK volatility, viscosity, and significantly
improved low temperature cold cranking at -30C for 5W grades
Saturate levels have increased substantially and provide
maximum solubility
Exceptional oxidation stability with much higher Viscosity
Index
Supply chain flexibility: PCMO, HDEO, Industrial and Marine

Heritage-Crystal Clean with our re-refinery located centrally in
Indianapolis, IN is proud to be an active member of ILMA.

crystal-clean.com

27


http://www.crystal-clean.com http://www.crystal-clean.com

Table of Contents for the Digital Edition of ILMA Compoundings January 2018

Meet ILMA’s New President DAVE CROGHAN
ADDING ANOTHER DIMENSION
THE BIG CHILL
LETTER FROM THE CEO
INSIDE ILMA
Company Callout
WHAT’S COMING UP
INDUSTRY RUNDOWN
In the Know
International Insight
Market Report
BUSINESS HUB
COUNSEL COMPOUND
WASHINGTON LANDSCAPE
IN NETWORK
Member Connections
Cross Connections
PORTRAIT
ILMA Compoundings January 2018 - Cover1
ILMA Compoundings January 2018 - Cover2
ILMA Compoundings January 2018 - 1
ILMA Compoundings January 2018 - 2
ILMA Compoundings January 2018 - LETTER FROM THE CEO
ILMA Compoundings January 2018 - INSIDE ILMA
ILMA Compoundings January 2018 - 5
ILMA Compoundings January 2018 - Company Callout
ILMA Compoundings January 2018 - 7
ILMA Compoundings January 2018 - WHAT’S COMING UP
ILMA Compoundings January 2018 - 9
ILMA Compoundings January 2018 - INDUSTRY RUNDOWN
ILMA Compoundings January 2018 - 11
ILMA Compoundings January 2018 - In the Know
ILMA Compoundings January 2018 - 13
ILMA Compoundings January 2018 - International Insight
ILMA Compoundings January 2018 - 15
ILMA Compoundings January 2018 - Market Report
ILMA Compoundings January 2018 - 17
ILMA Compoundings January 2018 - Meet ILMA’s New President DAVE CROGHAN
ILMA Compoundings January 2018 - 19
ILMA Compoundings January 2018 - 20
ILMA Compoundings January 2018 - 21
ILMA Compoundings January 2018 - 22
ILMA Compoundings January 2018 - 23
ILMA Compoundings January 2018 - ADDING ANOTHER DIMENSION
ILMA Compoundings January 2018 - 25
ILMA Compoundings January 2018 - 26
ILMA Compoundings January 2018 - 27
ILMA Compoundings January 2018 - 28
ILMA Compoundings January 2018 - THE BIG CHILL
ILMA Compoundings January 2018 - 30
ILMA Compoundings January 2018 - 31
ILMA Compoundings January 2018 - 32
ILMA Compoundings January 2018 - 33
ILMA Compoundings January 2018 - BUSINESS HUB
ILMA Compoundings January 2018 - 35
ILMA Compoundings January 2018 - COUNSEL COMPOUND
ILMA Compoundings January 2018 - 37
ILMA Compoundings January 2018 - WASHINGTON LANDSCAPE
ILMA Compoundings January 2018 - 39
ILMA Compoundings January 2018 - Member Connections
ILMA Compoundings January 2018 - 41
ILMA Compoundings January 2018 - Cross Connections
ILMA Compoundings January 2018 - 43
ILMA Compoundings January 2018 - PORTRAIT
ILMA Compoundings January 2018 - Cover3
ILMA Compoundings January 2018 - Cover4
http://www.nxtbook.com/ygsreprints/ILMA/g110500_ILMA_vol69_no10
http://www.nxtbook.com/ygsreprints/ILMA/g109884_ILMA_vol69_no9
http://www.nxtbook.com/ygsreprints/ILMA/g109284_ILMA_vol69_no8
http://www.nxtbook.com/ygsreprints/ILMA/g108494_ILMA_vol69_no7
http://www.nxtbook.com/ygsreprints/ILMA/g107507_ILMA_vol69_no6
http://www.nxtbook.com/ygsreprints/ILMA/g106483_ILMA_vol69_no5
http://www.nxtbook.com/ygsreprints/ILMA/g105803_ILMA_vol69_no4
http://www.nxtbook.com/ygsreprints/ILMA/g104743_ILMA_vol69_no3
http://www.nxtbook.com/ygsreprints/ILMA/g103647_ILMA_vol69_no2
http://www.nxtbook.com/ygsreprints/ILMA/g102869_ILMA_vol69_no1
http://www.nxtbook.com/ygsreprints/ILMA/g101930_ILMA_vol68_no12
http://www.nxtbook.com/ygsreprints/ILMA/g100836_ILMA_vol68_no11
http://www.nxtbook.com/ygsreprints/ILMA/g99200_ILMA_vol68_no10
http://www.nxtbook.com/ygsreprints/ILMA/g98468_ILMA_vol68_no9
http://www.nxtbook.com/ygsreprints/ILMA/g97711_ILMA_vol68_no8
http://www.nxtbook.com/ygsreprints/ILMA/G96767ILMA_vol68_no7
http://www.nxtbook.com/ygsreprints/ILMA/G95397ILMA_vol65_no6
http://www.nxtbook.com/ygsreprints/ILMA/G94323ILMA_vol68_no5
http://www.nxtbook.com/ygsreprints/ILMA/G93127_ILMA_vol69_no4
http://www.nxtbook.com/ygsreprints/ILMA/G91785_ILMA_vol68_no3
http://www.nxtbook.com/ygsreprints/ILMA/G90956_ILMA_vol68_no2
http://www.nxtbook.com/ygsreprints/ILMA/G89146_ILMA_vol68_no1
http://www.nxtbook.com/ygsreprints/ILMA/G87981_ILMA_vol67_no12
http://www.nxtbook.com/ygsreprints/ILMA/G85409_ILMA_vol67_no11
http://www.nxtbook.com/ygsreprints/ILMA/G83595_ILMA_vol67_no10
http://www.nxtbook.com/ygsreprints/ILMA/G81672_ILMA_vol67_no9
http://www.nxtbook.com/ygsreprints/ILMA/G80238_ILMA_vol7_no8
http://www.nxtbook.com/ygsreprints/ILMA/G79388_ILMA_vol7_no7
http://www.nxtbook.com/ygsreprints/ILMA/G78361_ILMA_vol7_no6
http://www.nxtbook.com/ygsreprints/ILMA/G77448_ILMA_vol7_no5
http://www.nxtbook.com/ygsreprints/ILMA/G75899_ILMA_vol67_no4
http://www.nxtbook.com/ygsreprints/ILMA/G75036_ILMA_vol67_no3
http://www.nxtbook.com/ygsreprints/ILMA/G72720_ILMA_vol67_no2
http://www.nxtbook.com/ygsreprints/ILMA/G72220_ILMA_vol67_no1
http://www.nxtbook.com/ygsreprints/ILMA/G70970_ILMA_vol66_no12
http://www.nxtbook.com/ygsreprints/ILMA/G69813_ILMA_vol66_no11
http://www.nxtbook.com/ygsreprints/ILMA/G67522_ILMA_vol66_no10
http://www.nxtbook.com/ygsreprints/ILMA/G66343_ILMA_vol66_no9
http://www.nxtbook.com/ygsreprints/ILMA/G64859_ILMA_vol66_no8
http://www.nxtbookMEDIA.com