NEW PRODUCTS TO POWER YOUR BUSINESS Rust-Preventative Weldable Primer Tempil introduced BLOXIDE°, a rustpreventive weldable primer that provides protection from rust formation on edges prepared for welding. It also acts as an oxygen/oxide scavenger in the weld pool. This results in a clean X-ray quality weld. Steel sections having their prepared edges coated with BLOXIDE° can be stored outside in open yards for extended periods of time before being welded. These can be shop- or field-welded after several months without any need for further cleaning. This saves substantial material and labor costs. Because BLOXIDE° is aluminum based, an electrical welding arc can be struck directly on the coating with ease without generating any hazardous fumes or foul odor. Welding over the aluminum coating also ensures that there are no inclusions or porosity in the weld. (www.tempil.com) Patented Filter Medium for Core Cooling Multi-disciplined engineering and consulting firm ENERCON received patents for a filter medium for strainers used in nuclear reactor emergency core cooling systems (ECCS). ENERCON's Debris Bypass Eliminator was developed in response to the Nuclear Regulatory Commission's Generic Safety Issue, GSI-191, " Assessment of Debris Accumulation on PWR Sump Performance. " During long-term recirculation for cooling of the reactor, core fibrous debris material could bypass through the ECCS sump strainer and potentially block cooling water flow paths in the reactor core. The Debris Bypass Eliminator is a secondary filter system that works with the ECCS sump strainer to reduce or eliminate the fibrous debris material in cooling water entering the reactor core. (www.enercon.com) True Machine Train Alignment Ascertaining the alignment of all machines in a multiple machine train has always been a cumbersome and timeconsuming process. The new ROTALIGN ULTRA MultiCoupling feature allows the alignment of up to seven machines in a train to be measured simultaneously, with a single quarter rotation (or less) of the shafts. This saves time and resources when aligning turbine trains on the critical path in an outage or machine trains with gearboxes that are difficult to turn. The millwright's job efficiency is thereby enhanced while lightening the workload and increasing the accuracy of the final alignment through optimization of corrective moves throughout the train. (www.ludeca.com) Inclusion in New Products does not imply endorsement by POWER magazine. 64 www.powermag.com POWER | April 2012http://www.tempil.com http://www.enercon.com http://www.ludeca.com http://www.powermag.com