POWER May 2010 - 130

NEW PRODUCTS
Combo Temp and Humidity Sensor
E Instruments has just released its TH300 humidity and temperature sensor, which
is ideal for applications that require a single, high-accuracy instrument. The sensor
measures relative and absolute humidity, dew point, wet and dry temperatures,
and enthalpy. The range of measurement is from 0% to 100% relative humidity and
-40F to 356F. Accuracy is ±1.5% RH and ±0.45F. The sensor can display up to four
simultaneous parameters and includes all the standard transmitter output options.
(www.e-inst.com)
Henkel Corp. has introduced two new Loctite threadlockers formulated to withstand consistent operating
temperatures up to 360F. Curing consistently and thoroughly without cleaning, these new products tolerate
the oils and lubricants typically found on " as received " threaded fasteners. These products will also cure on
plated, aluminum, stainless, and chromated fasteners without primers.
Loctite 243 and Loctite 263 prevent fastener loosening caused by shock, vibration, and temperatureinduced
expansion and contraction. Loctite 243 is a blue, medium-strength, thixotropic liquid threadlocker
that can be disassembled using standard hand tools. Loctite 263 is a red, high-strength, thixotropic
threadlocker for applications where permanent assembly is required. Both products provide a leak-proof,
corrosion-free seal of the threads. (www.henkelna.com/nextgenthreadlockers)
Infrared Camera Measures Through Flames
Lenox Instrument Co. announced its new FireSight
Thermal Imaging Camera System designed specifically
to provide clear, real-time monitoring and accurate,
noncontact temperature measurement through
combustion flames. Temperature data are transmitted
from 110,000 individual temperature points via a highspeed
digital connection.
Designed to be installed through a small opening in
the combustion chamber wall, the high-resolution
camera and lens tube employs efficient watercooling
and integrated air-purging to keep the
optics clear of debris and enable operation in
high-temperature furnace environments. The
camera includes image processing software that
can control or monitor up to four imaging cameras
and allows high-resolution images and data to be
viewed, manipulated, recorded, and archived. The
software can also remotely control the camera(s).
It also features automatic storage of images and
video on triggered measurement or high/low
alarm conditions with optional analog signals or
alarm outputs to a programmable logic controller
or distributed control system.
Infrared furnace camera accessories include an
automatic retract system that pulls the camera
back on loss of water cooling or air, a monitoring
station to provide a local point of connection
Inclusion in New Products does not imply endorsement by POWER magazine.
130
www.powermag.com
POWER | May 2010
and status monitoring of coolant flow, purge air pressure,
and electrical connections. A control processor provides
connection to a wide range of industrial interfaces (TCP/
IP protocol, OPC, analog signals, or alarm outputs).
(www.lenoxinst.com)
New and Improved Loctite Formula

http://www.e-inst.com http://www.henkelna.com/nextgenthreadlockers http://www.lenoxinst.com http://www.powermag.com

POWER May 2010

Table of Contents for the Digital Edition of POWER May 2010