Torque Tube Displacer Problems? Eclipse® makes replacement easy. 1. Retire it. Having problems with antiquated level controls? Fed up with high maintenance, recalibration shutdowns or inaccuracies caused by something as simple as a specific gravity change? Eclipse® eliminates these problems. 2. Strip it. Simply remove the upper head from the existing caged unit where the flange connects to the lower cage. Discard this portion, along with the displacer and other internals. Your cage is now ready for an Eclipse® Guided Wave Radar retrofit. 3. Insert it. Insert the mating flange, the application-specific Eclipse® probe, and the two-wire powered electronics. Replacement flanges or custom cages are available as needed. Add HART® , FOUNDATION fieldbus™ , PROFIBUS PA or PACTware™ as desired. 4. Believe it. Configuration takes only minutes. No calibration is required. Accuracy is not affected by changing densities and dielectrics or by high temperatures or pressures. For convenience the electronics feature a quick connect/disconnect. There's no moving parts to ever wear out. You'll wonder why you waited so long. For complete details on retrofitting torque tube displacers with Eclipse® Guided Wave Radar call 1-800-624-8765 or visit us online at magnetrol.com. Worldwide Level and Flow Solutionssm 5300 Belmont Road * Downers Grove, IL 60515 * 630-969-4000 * magnetrol.com circle 8 on reader service cardhttp://www.magnetrol.com http://www.magnetrol.com