POWER September 2013 - 71

NEW PRODUCTS TO POWER YOUR BUSINESS
Self-Leveling Camera Head
RIDGID announced a new self-leveling
camera head for its SeeSnake Max rM200
Camera System. With its always-upright,
self-leveling design, the new head was
added to help take the guesswork out of
inspections. Users can now count on a
clear, right-side-up image or video in even
the most complicated lines. Capable of
inspecting lines up to 200 feet in length
and 1.5 inches to 6 inches in diameter,
it is equipped with a built-in docking
system for attaching upcoming viewing
monitors and is compatible with the
RIDGID SeeSnake CS10 and CS1000 Digital
Recording Monitors. The rM200 is also
equipped with an integrated transport
system to make it easily portable on a
job. Users can either carry the reel or use
the product's wheel system to meet their
jobsite needs. (www.emerson.com)
Transformer and Capacitor
Testers
HDE's Quick-Check Transformer & Capacitor
Testers provide a quick and easy test of
the primary and secondary sides of deenergized
transformers and capacitors
for opens or shorts. The Quick-Check
automatically distinguishes between
transformers and capacitors and can test
capacitors individually or connected in
capacitor banks. They operate with a
single push button and provide clear
indications of open circuits, short circuits,
and confi rmation that the test results are
OK. (www.HDElectricCompany.com)
Outdoor-Rated Charge
Controller
Renewable energy electronics and backup
power applications provider OutBack
Power Technologies announced the
availability of a crucial link in its sealed
power components series: the FLEXmax
Extreme charge controller. The device
is the " fi rst truly outdoor-rated charge
controller on the market, " the company
says. The charge controller is a sealed,
passively cooled, and fan-less design
with a National Electrical Manufacturers
Association (NEMA) 3R-rated enclosure
that can be installed outdoors and
withstand rain, ice, and other harsh
conditions. It also features advanced
circuit topology that reduces radiofrequency
interference. Its high effi ciency
and low-self-consumption of power
improves on-site energy harvesting and
contributes to lowered fuel consumption
in generator-based or hybrid installations
combining both renewable and
conventional energy generation schemes.
(www.outbackpower.com)
Rust-Removing Cotton Fiber Abrasive Wheels
A line of cotton fi ber abrasive wheels for removing rust, corrosion, and threadlock
from pipe threads during process maintenance, as well as for deburring
manufactured pipe and tubing, is now available from Rex-Cut Abrasives. Rex-Cut
Type 1 Wheels for pipe thread maintenance feature multiple layers of nonwoven
cotton fabric and aluminum oxide abrasives pressed and bonded together with a
soft bond and are ideally suited for removing rust and corrosion from pipe threads.
For thread-lock removal without changing the thread geometry, Smooth Touch
wheels with a medium bond are recommended and last up to fi ve times longer than
unitized wheels, the fi rm claims. Developed for use on stainless steel, Inconel, and
other highly alloyed pipe and tubing, Rex-Cut Type 1 and Smooth Touch Wheels for
pipe thread maintenance are available 1/16-inch, 1/8-inch, and 1/4-inch thick and
in 2-inch, 3-inch, and 4-inch sizes. For manual or robotic deburring and fi nishing
of machined and cast parts, different grit types, grain sizes, and bonds are offered.
(www.rexcut.com)
Inclusion in New Products does not imply endorsement by POWER magazine.
September 2013 | POWER
www.powermag.com
71
http://www.emerson.com http://www.HDElectricCompany.com http://www.outbackpower.com http://www.rexcut.com http://www.powermag.com
POWER September 2013

Table of Contents for the Digital Edition of POWER September 2013
