Instrumentation & Measurement Magazine 25-8 - 18

[5] IEEE Standard for Terminology and Test Methods for Circuit Probes,
IEEE Std. 1696-2013, Institute of Electrical and Electronics
Engineers, 2017.
[6] IEEE Standard for Jitter and Phase Noise, IEEE Std. 2414-2020,
Institute of Electrical and Electronic Engineers, 2017.
[7] S. Rapuano, J. Jendzurski, L. De Vito, S. J. Tilden, W. B. Boyer and
N. G. Paulter, " The documentary standards of the IEEE technical
committee 10, " IEEE Instrum. Meas. Mag., vol. 23, no. 8, pp. 8-13,
Nov. 2020.
[8] L. De Vito, J. Jendzurski, S. Rapuano, W. B. Boyer, J. Blair and
N. G. Paulter, " The IEEE technical committee 10: the waveform
generation, measurement, and analysis committee, " IEEE
Instrum. Meas. Mag., vol. 24, no. 8, pp. 7-10, Nov. 2021.
Luca De Vito (M'10-SM'12) is an Associate Professor of electrical
and electronic measurement with the Department of
Engineering of the University of Sannio in Benevento, Italy.
He is Subcommittee Chair of the IMS TC-10, Region 8 Liaison
of the IEEE Instrumentation and Measurement Society
(IMS), and Editor for Measurement (Elsevier). He is Member-at-Large
of the IMS Administrative Committee for the
2022-2025 term. His research interests include measurements
for telecommunications, data converter testing and biomedical
instrumentation.
John Jendzurski is an Electrical Engineer at National Institute
of Standards and Technology in Gaithersburg, Maryland, USA
where he conducts research and standards development in
through-barrier and traffic enforcement radar. He is currently
the Chair of TC-41: Traffic Enforcement Technologies, responsible
for performance standards in down-the-road radar and
lidar used in traffic enforcement.
Sergio Rapuano (M '00, SM '10), Ph.D., is a Full Professor of
electrical and electronic measurement with the Department
of Engineering of the University of Sannio in Benevento, Italy.
He is Member-at-Large of the Administrative Committee, Vice
President for Education and past Vice President for Membership
of the IEEE Instrumentation and Measurement Society
(IMS), Chair of the IEEE Italy Section, Chair of the IMS TC25
Medical and Biological Measurements and Subcommittee
Chair of the IMS TC-10. He participated in the realization of
three IEEE standards and coordinated the working group that
developed the new IEEE 2414 Standard. He is Secretary of the
Steering Committee of the IEEE-International Symposium on
Medical Measurement and Applications (MeMeA). His research
interests include ADC and DAC modelling and testing,
digital signal processing, distributed measurement systems,
and medical measurement.
William Boyer is retired from Sandia National Laboratories
in Albuquerque, New Mexico, USA. For most of his career at
Sandia, he was responsible for the development of large high
speed data acquisition systems. He is currently the Chair of the
TC-10 Subcommittee responsible for the IEEE 1057 Waveform
Recorder Standard.
Jerome Blair (M '89, SM '94, F '04) spent his career working for
contractors to the National Nuclear Security Administration,
designing, characterizing and evaluating complex measurement
systems and their software. Since 1989, he has been an
active member of the IEEE Instrumentation and Measurement
Society's TC-10. He is a past Associate Editor for the IEEE
Transactions on Instrumentation and Measurement.
Nicholas Paulter is with the National Institute of Standards
and Technology in Gaithersburg, Maryland, USA. He develops
and oversees metrology programs related to a variety of
threat-detection and trauma-mitigation technologies. He is the
Chair of the TC-10 and an IEEE Fellow.
18
IEEE Instrumentation & Measurement Magazine
November 2022
Instrumentation & Measurement Magazine 25-8

Table of Contents for the Digital Edition of Instrumentation & Measurement Magazine 25-8
