Instrumentation & Measurement Magazine 25-2 - 14

References
[1] L. Bai, Y. Liang, J. Shao, Y. Cheng, Q. Zhou, and J. Zhang,
" Moran's index-based tensor decomposition for eddy current
pulsed thermography sequence processing, " IEEE Trans. Instrum.
Meas., vol. 70, no. c, pp. 1-12, 2021.
[2] L. Bai, S. Tian, Y. Cheng, G. Y. Tian, Y. Chen, and K. Chen,
" Reducing the effect of surface emissivity variation in eddy
current pulsed thermography, " IEEE Sens. J., vol. 14, no. 4, pp.
1137-1142, 2014.
[3] C. Ren, L. Zhu, L. Bai, L. Tian, J. Zhang, and Z. Liu, " A thermal
imaging based method for 2D electric current distribution
measurement, " in Proc. Int. Conf. Sensing, Meas. Data Anal. Era
Artif. Intell. (ICSMD 2020), pp. 606-610, 2020.
[4] T. Liang, W. Ren, G. Y. Tian, M. Elradi, and Y. Gao, " Low energy
impact damage detection in CFRP using eddy current pulsed
thermography, " Compos. Struct., vol. 143, pp. 352-361, 2016.
[5] R. Yang et al., " Electromagnetic induction heating and image
fusion of Silicon photovoltaic cell electro thermography and
electroluminescence, " IEEE Trans. Ind. Informatics, vol. 16, no. 7,
pp. 4413-4422, 2020.
[6] J. Zhu, Z. Wang, and G. Tian, " Comparative study of eddy current
pulsed and long pulse optical thermography for defect detection
in aluminum plate, " in Proc. 24th IEEE Int. Conf. Autom. Comput.
Improv. Product. through Autom. Comput. (ICAC 2018), pp. 6-7, 2018.
[7] Y. Peng, S. Huang, Y. He, and X. Guo, " Eddy current pulsed
thermography for noncontact nondestructive inspection of motor
winding defects, " IEEE Sens. J., vol. 20, no. 5, pp. 2625-2634, 2020.
[8] S. M. Shepard, J. R. Lhota, B. A. Rubadeux, D. Wang and
T. Ahmed, " Reconstruction and enhancement of active
thermographic image sequences, " Optical Eng., vol. 42, no. 5, pp.
1337-1342, May 2003.
[9] X. Maldague and S. Marinetti, " Pulsed phase infrared
thermography, " J. Appl. Phys., vol. 79, no. 5, pp. 2694-2698, 1996.
[10] N. Otsu, " A threshold selection method from gray-level
histograms, " Automatica, vol. 11, nos. 285-296, pp. 23-27, 1975.
[11] W. Niblack, An Introduction to Image Processing. Englewood Cliffs,
New Jersey, USA: Prentice-Hall, 1986.
[12] J. Sauvola and M. Pietikainen, " Adaptive document image
binarization, " Pattern Recognition, vol. 33, no. 2, pp. 225-236, 2000.
[13] J. A. Wong and A. Hartigan, " Algorithm AS 136: a K-means
clustering algorithm, " J. Royal Statistical Soc., vol. 28, no. 1, pp.
100-108, 1979.
[14] B. Gao, X. Li, W. L. Woo, and G. Y. Tian, " Physics-based image
segmentation using first order statistical properties and genetic
algorithm for inductive thermography imaging, " IEEE Trans.
Image Process., vol. 27, no. 5, pp. 2160-2175, May 2018.
[15] A. Hyvärinen, J. Hurri, and P. O. Hoyer, Independent Component
Analysis. London, UK: Springer, 2009.
[16] L. Bai, B. Gao, G. Y. Tian, W. L. Woo, and Y. Cheng, " Spatial and
time patterns extraction of eddy current pulsed thermography
using blind source separation, " IEEE Sens. J., vol. 13, no. 6, pp.
2094-2101, 2013.
[17] X. Xiao, B. Gao, W. L. Woo, G. Y. Tian, and X. T. Xiao, " Spatialtime-state
fusion algorithm for defect detection through eddy
current pulsed thermography, " Infrared Phys. Technol., vol. 90, pp.
133-145, 2018.
14
[18] B. Gao, L. Bai, W. L. Woo, G. Y. Tian, and Y. Cheng, " Automatic
defect identification of eddy current pulsed thermography using
single channel blind source separation, " IEEE Trans. Instrum.
Meas., vol. 63, no. 4, pp. 913-922, 2014.
[19] B. Huang, C. Mu, D. Goldfarb, and J. Wright, " Provable models
for robust low-rank tensor completion, " Pacific J. Optimization,
vol. 11, no. 2, pp. 339-364, 2015.
[20] C. Lu, J. Feng, Y. Chen, W. Liu, Z. Lin, and S. Yan, " Tensor robust
principal component analysis with a new tensor nuclear norm, "
IEEE Trans. Pattern Anal. Mach. Intell., vol. 42, no. 4, pp. 925-938,
Apr. 2020.
[21] J. Ahmed, B. Gao, and W. L. Woo, " Sparse low rank tensor
decomposition for metal defect detection using thermographic
imaging diagnostics, " IEEE Trans. Ind. Informatics, vol. 17, no. 3,
pp. 1810-1820, Mar. 2021.
[22] J. Song, B. Gao, W. L. Woo, and G. Y. Tian, " Ensemble tensor
decomposition for infrared thermography cracks detection
system, " Infrared Phys. Technol., vol. 105, p. 103-203, Mar. 2020.
[23] T. Wu, B. Gao, and W. L. Woo, " Hierarchical low-rank and
sparse tensor micro defects decomposition by electromagnetic
thermography imaging system, " Philos. Trans. A. Math. Phys. Eng.
Sci., vol. 378, no. 2182, p. 20190584, 2020.
[24] J. Wilson, G. Y. Tian, I. Z. Abidin, S. Yang, and D. Almond,
" Modelling and evaluation of eddy current stimulated
thermography, " Nondestruct. Test. Eval., vol. 25, no. 3, pp. 205-218,
2010.
[25] Q. Yi, H. Malekmohammadi, G. Y. Tian, S. Laureti, and M. Ricci,
" Quantitative evaluation of crack depths on thin aluminum plate
using eddy current pulse-compression thermography, " IEEE
Trans. Ind. Informatics, vol. 16, no. 6, pp. 3963-3973, 2020.
[26] N. Barakat, J. Mortadha, A. Khan, B. A. Abu-Nabah, M. O.
Hamdan, and S. M. Al-Said, " A one-dimensional approach
towards edge crack detection and mapping using eddy current
thermography, " Sensors Actuators A Phys., vol. 309, p. 111999, Jul.
2020.
[27] L. Tian, Z. Wang, W. Liu et al., " A new GAN-based approach to
data augmentation and image segmentation for crack detection
in thermal imaging tests, " Cogn. Comput., vol. 13, pp. 1263-1273,
2021.
[28] X. Zhang, J. Zhang, L. Bai, L. Tian, J. Zhang and Y. Cheng,
" Research on defects recognition method based on impedance
information, " in Proc. Int. Conf. Sensing, Meas. Data Anal. Era Artif.
Intell. (ICSMD 2020), pp. 292-296, 2020.
Yiping Liang is currently working toward his Ph.D. degree
in the School of Automation Engineering at the University of
Electronic Science and Technology of China, Chengdu, China,
where he received the B.S. degree in 2017. His current research
interests include nondestructive testing, sensor signal processing
and blind signal separation.
Libing Bai (libing.bai@uestc.edu.cn) is a Professor in the
School of Automation Engineering at the University of Electronic
Science and Technology of China, Chengdu, China,
where he received the B.S. degree and Ph.D. degree in 2008
and 2013, respectively. He was a visiting student of Newcastle
IEEE Instrumentation & Measurement Magazine
April 2022
Instrumentation & Measurement Magazine 25-2

Table of Contents for the Digital Edition of Instrumentation & Measurement Magazine 25-2
