Efficient Plant May 2022 - 29

department | products
POSITION SENSORS
The high-temperature HATR-750 LVDT position sensors are said to provide
a reliable and long-term solution to sensors that fail when operating in
environments with unanticipated temperature spikes. Hermetically sealed and
constructed of 3/4-in.-dia. stainless steel, the AC-operated LVDTs operate
in fluctuating temperatures from -65 F to 400 F, with reportedly excellent
linearity, high sensitivity, and infinite resolution. Windings are potted inside
the housing with epoxy for added protection from conditions caused by harsh
environments. Units are also said to withstand shock and vibration for a
consistent and reliable output.
NewTek Sensor Solutions
Pennsauken, NJ
newteksensors.com
Ultrasonic Bearing
Friction, Cavitation,
And Leak Detection
Sensors - UltraTrak
850s Family of Sensors
Signifi cant damage to critical assets that lead to
unplanned downtime is one of the most expensive
hurdles your facility encounters. While there is never
a convenient time for this to happen, there are better
ways to be prepared and minimize the impact.
Th e UltraTrak 850S family of sensors are versatile
modern sensors and transmitters-specialized in highspeed
bearings, slow-speed bearings, steam traps and
valves, and cavitation detection-designed to detect
early onset failures quickly and easily in industrial
equipment, allowing you to take control and prevent
catastrophic damage to critical assets.
Each sensor can be installed and working in tandem
with existing plant automation and measurement
applications within 10 minutes, ensuring you can
monitor the health of your assets in real-time.
Th e UltraTrak 850S sensors will allow you to take
back complete control of your critical assets while
signifi cantly increasing production.
SPLIT SEAL
A non-contact Split Polymer Labyrinth Seal (SPLS) for large pumps,
gearboxes, and other large rotating equipment uses thermoset
polyurethane to create a non-contacting three-piece seal design
that includes a rotor with a built-in split valve, a stator, and a metal
clamp. The seal reportedly has practically no wearing components, so
fretting and wear of shafts, typically seen in conventional lip seals, are
significantly minimized.
A.W. Chesterton Co.
Groveland, MA
chesterton.com
MAY 2022
UE Systems Inc.
Elmsford, NY
uesystems.com/ontrak-smartlube
EFFICIENTPLANTMAG.COM | 29
SPONSORED PRODUCT
http://www.newteksensors.com http://www.uesystems.com/ontrak-smartlube http://www.chesterton.com http://www.EFFICIENTPLANTMAG.COM
Efficient Plant May 2022

Table of Contents for the Digital Edition of Efficient Plant May 2022
