FT-210 Series - TurboFlow® Low Flow Turbine Sensor Low Flow Rates .1 to 2.5 LPM and High Accuracy ±3% of Reading Lightweight Turbine Ensures Fast Startup Mounts In Any Orientation Gems FT-210 features proven turbine technology in a small package for low flow applications. The turbine technology provides a highly repeatable sensor ideally suited for measurement of either volume dispensing and/or flow rate applications. The small turbine reacts quickly to on/off dispensing applications. Each sensor is 100% tested, ensuring years of service life. (+) 5-24Vdc (-) O Vdc Ro H S 3k-30k Ohms CUSTOMER SUPPLIED G EM ® S CO PLIAN M T Ro H S G Specifications EM ® S CO PLIAN M T OUTPUT FLOW SENSORS - ELECTRONIC Wetted Materials Body Turbine Bearings Operating Pressure Burst Pressure Flow Range Pulses Frequency Output Operating Temperature Viscosity Filter Input Power Output (Hz) Accuracy Repeatability Electrical Connection Inlet/Outlet Ports Nylon 12 (Grilamid TR55) Nylon 12 Composite PTFE/15% Graphite 350 PSI (24 bar) 1400 PSI (97 bar) .026-.65 gallons/minute 0.1-2.5 liters/minute 3.4-84.5 ounces/minute 83,200 per gallon 22,000 per liter 650 per ounce 36.6-917 Hz -4°F to 212°F (-20°C to 100°C) 32 to 70 SSU (.8 to 16 Centistokes) <50 Microns 5 to 24 VDC NPN Sinking Open Collector @ 20mA Maximum Leakage Current 10μA (3K-30K Pull up resistor required) ±3% of Reading 0.5% of Full Scale 9.4mm Spacing 3-pole DIN Connector (1˝ high) 1/4˝ NPT (1/4˝ G Male also available) How To Order Dimensions 1.11˝ (28.2 mm) .43˝ (11.0 mm) 1/4˝ NPT OR 1/4˝ G 1.77˝ (45.0 mm) Wiring (+) (-) 5-24Vdc O Vdc 3k-30k Ohms CUSTOMER SUPPLIED OUTPUT Pin Code: 1 = Output 2 = Supply 4 = Common .83˝ .11˝ Specify a Part Number for the Port Connection AND a Part Number for the DIN Electrical Connection. Two Part Numbers are required for a complete part assembly. .67˝ (17.0 mm) .83˝ (21.2 mm) .11˝ (2.8 mm) (21.2 mm) (2.8 mm) For Mating DIN Connector - P/N 212404 Function DIN Termination V+ FT-210 Sensor .67˝ (17.0 mm) 1.11˝ (28.2 mm) 1 - Body Material Port Size Nylon 12 Part Number 1/4˝ NPT 212465 1/4˝ G 212460 Output 2 .43˝ (11.0 mm) Pressure 1.77˝ Drop-Typical (45.0 mm) -- Stock Items. Electrical Connection 212404 GPM 0.26 0.40 0.53 0.66 350 5.0 300 4.4 250 3.6 200 2.9 150 2.2 100 1.5 50 0.7 PSI 218572 ∆ P MBAR Part Number 1 meter DIN PVC Cable Assembly with 10K pull-up resistor Mating DIN Connector 0.13 400 Description 1/4˝ NPT OR 1/4˝ G 0 0 0.5 1 1.5 2 2.5 3 FLOW RATE - L/MIN F-12 Visit www.GemsSensors.com for most current information. FT-210 Series / p1of1 / 30-JUL-14http://ecatalog.gemssensors.com/ecatalog/flow-sensors/en/212465 http://ecatalog.gemssensors.com/ecatalog/flow-sensors/en/212465 http://ecatalog.gemssensors.com/ecatalog/flow-sensors/en/212460 http://ecatalog.gemssensors.com/ecatalog/flow-sensors/en/212460 http://ecatalog.gemssensors.com/ecatalog/accessories/en/218572 http://ecatalog.gemssensors.com/ecatalog/accessories/en/218572 http://ecatalog.gemssensors.com/ecatalog/accessories/en/212404 http://ecatalog.gemssensors.com/ecatalog/accessories/en/212404 http://www.GemsSensors.com