PSIBAR® CVD TYPES 1700 Series-Hygienic Pressure Transmitters Pressure Ranges from 100 Millibar to 40 Bar Sanitary or G1 Process Connections Voltage and Current Output Models Temperature Cooling Options Available for 302ºF or 572ºF (150°C or 300°C) Operation The 1700 series features a stainless steel diaphragm with various process connections suitable for dairy and pharmaceutical applications. The 1700 is suitable for both static and dynamic pressure measurement in the ranges from 100 millibar to 40 bar and is available with a choice of electrical outputs and connecctions. Specifications Zero Tolerance Span Tolerance Mechanical Configuration Pressure Port Wetted Parts Electrical Connection Enclosure Fill Fluid Vibration Acceleration Shock Approvals Weight Voltage Output Units Output Supply Voltage (Vs) Supply Voltage Sensitivity Min. Load Resistance Current Consumption Current Output Units Output Supply Voltage (Vs) Supply Voltage Sensitivity Max. Loop Resistance Dimensions inch (mm) Fixed Plug to DIN 43650 M12 x 1 0 to 600 psi (0 to 40 bar) Gauge and Absolute >2 x Full Scale >2 x Full Scale Designed for more than 100 million cycles 2m Cable ±0.2% span/annum 0.25% 1% (0°C to 70°C), 2% for 100, 250, and 400 millibar ranges (0°C to 50°C) -13°F to +185°F (-25°C to +85°C) -13°F to +257°F (-25°C to +125°C) media 1% of span 1% of span see ordering chart 316 S/S: Seals Viton® (G1 thread only) see ordering chart IP65 = G (with connector fitted) IP67 = E & F Silicon oil or food grade 10g rms, 20 - 2000Hz 10g 100g 11ms CE, EXII 1G, E Exia IIC T4 175gm G1˝ Thread Version 1.73 (44.0) A/F Hex 3.17 (80.5) Clamp Version Clamp Version Ø1.04 (26.5) Ø1.04 (26.5) Flush Diaphragm Ø1.06 (27.0) Ø1.04 (26.5) 2.77 (70.5) 0.75 (19.0) Dairy Pipe Version 2.14 (54.5) Flush Diaphragm DIN 2 Ø1.77 (45.0) Flush Diaphragm DN 1 Ø1.06 (24.0) DN 1-1/2 Ø1.26 (32.0) Flush Diaphragm Ø1.06 (24.0) Ø2.52 (64.0) DN25 - Ø1.73 (44.0) DN40 - Ø2.20 (56.0) DN50 - Ø2.7 (68.5) Cooling Element see ordering chart 12 to 36Vdc 0.005% FS/Volt 10Kohm 15 mA max A 4 - 20mA 2 wire 12 to 36Vdc (IS units 14 - 28 volts) 0.005% FS/Volt (Vs-12) x 50 ohms Temperature Range Size A 302ºF (150°C) 0.87 (22) Number of Cooling Fins 2 572ºF (300°C) 1.34 (34) 3 Intrinsically Safe units length increased by 1.06˝ (27 mm). EMC Specifications Emissions & Immunity according to EN61326. 1700 Series / p1of2 / 3-APR-14 Visit www.GemsSensors.com for most current information. H-3 PRESSURE TRANSDUCERS Input Pressure Range Proof Pressure Burst Pressure Fatigue Life Performance Long Term Drift Accuracy Thermal Error Over Compensated Temperature Operating Temperatureshttp://www.GemsSensors.com