PSIBAR® CVD TYPES 1702 Series-Fixed Range Low Pressure Transmitters Pressure Ranges from 40 millibar to 1 Bar 316 S/S Diaphragm Voltage and Current Output Models Choice of Enclosures and Pressure Fittings The Gems 1702 low range pressure transmitter is ideal for pneumatics, process control and chemical processes. Featuring a 316 S/S diaphragm and Viton® o-ring the 1702 is compatible with many corrosive medias. A choice of process connections makes the units suitable for direct pipe mounting whilst optional eletrical outputs and connections allow interfacing with most systems. Specifications Zero Tolerance Span Tolerance Mechanical Configuration Pressure Port Wetted Parts Electrical Connection Enclosure Vibration Acceleration Shock Weight Voltage Output Units Output Supply Voltage (Vs) Supply Voltage Sensitivity Min. Load Resistance Current Consumption Current Output Units Output Supply Voltage (Vs) Supply Voltage Sensitivity Max. Loop Resistance 1702 Series / p1of2 / 3-APR-14 100 mbar to 1 bG, 100 mbar to 1bA >2 x Full Scale >2 x Full Scale Designed for more than 100 million cycles ±0.1% span/annum 0.25% 1% (0°C to 70°C) - 1 bar, 2% for 100 mbar to 400 mbar ranges (0°C to 50°C) -13°F to +185°F (-25°C to +85°C) -13°F to +257°F (-25°C to +125°C) media 1% of span 1% of span Dimensions inch (mm) 1.5 (38.1) to Disconnect see ordering chart 316 S/S, Viton® see ordering chart IP65 = G (with connector fitted) IP67 = E & F 10g rms, 20 - 2000Hz 10g 100g 11ms 140gm see ordering chart 12 to 36Vdc 0.005% FS/Volt 10Kohm 7 mA max 2m Cable (1702X-E3) M12 x 1 (1702X-E3) 1.85 (47.0) Ø1.04 (26.5) Ø1.06 (27.0) A/F Hex 0.47 (12.0) 4 - 20mA 2 wire 12 to 36Vdc 0.005% FS/Volt (Vs-12) x 50 ohms Fixed Plug to DIN 43650 (1702X-G3) PRESSURE TRANSDUCERS Input Pressure Range Proof Pressure Burst Pressure Fatigue Life Performance Long Term Drift Accuracy Thermal Error Over Compensated Temperature Operating Temperatures G1/4˝ DIN 3852 Thread Visit www.GemsSensors.com for most current information. 0.55 (14.0) 1/4˝ - 18 NPT Thread 0.55 (14.0) 0.90 (23.0) G1/2˝ DIN 3852 Thread Semi Flush Diaphragm G1/2˝ Manometer Thread H-7http://www.GemsSensors.com