MMS TYPE 9600 Series - Slimline Groundwater Monitoring Transducer Remote Ranging via PC Interface 20mm Diameter SDI-12 Communications Versions 318 S/S Wetted Parts Total Error Band <±0.1% FS (23°F to 113°F [-5°C to +45°C]) 9600 Series pressure transducers meets the rigorous conditions for ground water monitoring while providing ultimate performance. 9600 Series transducers feature built-in specific gravity compensation to provide a true level reading, even when the media is subject to temperature changes over the ranges 23°F to 113°F (-5°C to +45°C). Manufactured with 318 stainless steel wetted parts, which provide excellent corrosion resistance. Reduce installation time, or recalibrate an installed unit without withdrawing it from its media, by using a cable-connected PC or hand-held interface. The SDI-12 communicating versions offer minimal current draw for battery powered applications. Specifications Input Pressure Range Proof Pressure Burst Pressure Fatigue Life Performance Long Term Drift Accuracy Total Error Band Compensated Temperatures Operating Temperatures Electrical Output Supply Voltage Current Consumption Surge Protection Mechanical Configuration Pressure Port Wetted Parts Electrical Connection Enclosure Shock Approvals Weight Dimensions in. (mm) 0 - 3 to 0 - 100mWG 1.5 x Fs nominal range 3 x Fs Designed for more than 100 million FS cycles ±0.05% year ±0.05% <±0.1% Fs (23°F to 113°F [-5°C to +45°C]) 23°F to 113°F (-5°C to +45°C) -13°F to +158°F (-25°C to +70°C) non-freezing 5.57˝ MAX (141.5) (Ranges > 40m 150.5 max) SDI-12 (Temp output ±0.9°F [0.5°C]) or 4 - 20mA 8-30Vdc Standby less than 450µA; active less than 4mA average 61000-4-5 ±4kv Nosecone (M16 x 1.5 for calibration) Hastelloy, 318 Stainless Steel, Polyurethane, Acetal, Polyolefin Polyurethane Cable IP68 to 200mWG Withstands free fall to IEC 68-2-32 procedure 1 CE Approx. 100 grams (additional; cable 75 g/m) How to Order Wiring Details Red Blue Green SDI-12 mA Positive excitation Negative excitation SDI-12 +Ve -Ve Comms Use the bold characters from the chart below to construct a product code 9600 Series 9600 Output 03 - 4-20mA Measurand L - Level Pressure Connection 00 - Nosecone 9600 Series / p1of1 / 9-JUL-19 XX X 00 XXXXX XXXXM PRESSURE TRANSDUCERS Cable Length XXXXM - Cable length in meters (MAX 0060 for SDI-12) 05 - SDI-12 P - Pressure Calibrated Range XXXM - mWG (003M to 100M) XXXF - FtWG (010F to 330F) XXXP - PSI (005P to 145P) XXBX - Bar (00B3 to 10B0) Visit www.GemsSensors.com for most current information. H-87http://www.GemsSensors.com