SOLID-STATE How To Order Use the Bold characters from the chart below to construct a product code. Please reference Notes. PS98 -R -G15 -02 -G -A -150 -125 1 1 Output -R = Relay -T = Transistor 2 Pressure Range Insert Pressure Range Code from Tables 1, below. 3 Pressure Port -08 = 1/8˝-27 NPT External -02 = 1/4˝-18 NPT External -0J = 1/4˝ NPT External w/snubber -0E = 1/4˝ NPT Internal -0H = 1/2˝-14 NPT External -04 = 7/16˝-20 External (SAE #4, J514) -1P = 9/16˝-18 External (SAE #6, J1926-2) -1J = 7/16˝-20 External (SAE #4, J1926-2) -09 = G1/8˝ Internal -01 = G1/4˝ External -0A = R1/4˝ External 2 3 4 5 6 4 Electrical Termination -G = Large DIN (Mating Connector Supplied) -MXXX = IP68 Cable (Specify length in meters; e.g. -M012) -C = 6-Pin Connector (Mating Connector Not Supplied) 7 Note: 1. Set Points must be within Pressure Range selected in Step 2. 5 Circuit -A = N.O. -B = N.C. 6 Factory Set Point1 7 Re-Set Point1 Accessories PN 557254 165835 Description Mating Connector for -G Mating Connector for -C Tables 1 - Pressure Range Codes Bar Measurement Pressure Range Code Pressure Range (psi) Pressure Range Code Pressure Range (bar) F15 0-15 A10 0-1 F30 0-30 A16 0-1.6 F60 0-60 A25 0-2.5 G10 0-100 A40 0-4 G15 0-150 A60 0-6 G20 0-200 B10 0-10 G30 0-300 B16 0-16 G50 0-500 B25 0-25 G60 0-600 B40 0-40 H10 0-1000 B60 0-60 H15 0-1500 C10 0-100 H20 0-2000 C16 0-160 H30 0-3000 C25 0-250 H40 0-4000 C40 0-400 H50 0-5000 - - H60 0-6000 - - PS98 Series / p2of2 / 09-MAY-18 Visit www.GemsSensors.com for most current information. PRESSURE SWITCHES PSI Measurement I-6http://ecatalog.gemssensors.com/ecatalog/pressure-switches/en/gemslink/1=PS98 http://www.GemsSensors.com