ThermaShade® System ThermaShade® Terminology 10 2 7 3 11 6 8 1 5 12 13 9 4 1. Outrigger A member projecting from a curtain wall product to hold and support louvers and fascia elements. 2. Louver Horizontal extruded member that acts as a canopy and controls the radiation of light through glazing elements. 3. Fascia Outermost louver element that trims the face of the ThermaShade assembly. 4. Outrigger Connector "I" shaped extrusion used to align adjacent outriggers and prevent separation under loading conditions. 5. Flat Outrigger Cap Finished part used to cap the external gap created by two square extruded outriggers. 6. Spacer Unfinished part used at anchor clip to ensure proper spacing between ThermaShade assemblies. 7. Face Cover Extrusions that cover the pressure plate and anchoring components. 8. Face Cover Splice Formed angles used as a backer for the sealing of the joint between two face covers. 9. Medallion Circular attachment component used to prevent separation between the end outrigger and the first ThermaShade unit. 10. Pressure Plate Assembly Aluminum extrusion combined with gaskets and thermal isolator used to seal and retain the glass in a curtain wall system. 11. Anchor Clip Prefabricated part to attach ThermaShade units to curtain wall system. 12. Concealed Anchor Assembly Anchor with covers. 13. Exposed Anchor Assembly 09-1000-07 | Effective Date: January 18, 2019 Page-3