ThermaShade® Combined Load Certification WIND Dead Load Weight per Square Foot Outrigger Weight Square 3.65 lbs./FT² Rounded 3.09 lbs./FT² Wedge 4.63 lbs./FT² Curved 3.08 lbs./FT² SNOW SURCHARGE & DRIFTS FROM ROOF SNOW ICE DEAD LOAD After certified combined load data indicated below has been obtained, it should be used to determine if project qualifies for use of pre-engineered ThermaShade®. It is recommended that a copy of this document be maintained in the project's files. NOTE: Allowable combined load (in PSF) as required by the code of jurisdiction and/or code referenced in ASCE standard (Minimum Design Loads for Buildings and Other Structures) and determined by the building engineer of record (reference signed document) consisting of dead - see chart above - load plus other load effects such as snow, snow surcharges and drifts, ice, wind, live load roof, or others. PROJECT: LOCATION: COMBINED LOAD: ENGINEER OF RECORD: SIGNATURE DATE: 09-1000-07 | Effective Date: January 18, 2019 Page-51