YSD 600 T/TH Sliding Door SLIDING DOOR SIZE LIMITATIONS (NON-IMPACT, Continued) MAXIMUM FRAME SIZE* (AS TESTED) CONFIGURATION OOXO & OXOO OXXO XOOX 16'-3 " x 9'-0 " Without Reinforcing Design Load +75/-75 PSF 20'-6 " x 8'-0 " Without Reinforcing Design Load +100/-100 PSF 16'-3 " x 8'-0 " With Reinforcing Design Load +120/-120 PSF 16'-3 " x 8'-0 " With Reinforcing Design Load +90/-90 PSF 16'-3 " x 9'-0 " Without Reinforcing Design Load +75/-75 PSF 20'-6 " x 8'-0 " With Reinforcing Design Load +90/-90 PSF 16'-3 " x 9'-0 " O FIXED * If the height to width ratio exceeds 3:1, the sliding door must be reviewed by YKK AP engineering. O NOTE: Frame width and height should allow 3/4 " for width & 1/2 " for height overall clearance between the door frame and rough opening. This allows for thermal expansion and ease of installation. Page-26 X FIXED FRAME HEIGHT All doors with frame heights over 96 " must be reviewed by YKK AP Engineering. FRAME WIDTH 3/8 " ROUGH OPENING X With Reinforcing Design Load +90/-90 PSF 3/8 " X 20'-6 " x 8'-0 " 3/8 " 1/8 " O FIXED Without Reinforcing Design Load +75/-75 PSF FLOOR ELEV. ROUGH OPENING 06-1001-09 | Effective Date: July 29, 2020