YTD 350 TH Terrace Door YHC 300 OG CURTAIN WALL - OUTSWING Impact Structural Seal Method 5-1/4 " [133.4mm] 36 36 E9-3161 E9-3102 5-3/16 " [131.8mm] HEAD BE9-4811 BE9-4830 11-5/32 " [283.4mm] E9-4809 BE9-4811 34 *This option is intended to integrate into designs that require ADA-compliant access to balconies and terraces. Compliance can depend on hardware, approach area, reach, forces and motion; and therefore, must be verified by the architectural and engineering team for each application. With properly designed building conditions and correct installation, YKK AP Low profile threshold components will meet accessibility criteria per the AMERICANS WITH DISABILITIES ACT 404.2.5 AND Fair Housing Act Regulations 24 CFR 100.205 Chapter 4. " Thresholds and Accessibility Routes at Exterior Doors. " 2-3/16 " [55.6mm] BE9-4802 2-3/16 " [55.6mm] BE9-4802 3-1/2 " [88.9mm] E9-4809 SECTION 34A 10 " BOTTOM DOOR RAIL W/ STANDARD SILL SECTION 34 STANDARD SILL BE9-4828 BE9-4824 SECTION 34B 1/2 " [12.7mm] 5-3/16 " [131.8mm] E9-4809 Note: E2-0750 central gasket not required in doors with Low Profile Sill. 38 E9-4809 FRAME HEIGHT (F.H.) E9-4809 35 38 Opp. 38A 34 BE9-4801 BE9-4811 5-3/16 " [131.8mm] 38 OPTIONAL LOW PROFILE SILL* (for Single Outswing Only) BE9-4830 BE9-4828 BE9-4824 1/2 " [12.7mm] SECTION 36 37 11-5/32 " [283.4mm] AS-3179 SECTION 34C 10 " BOTTOM DOOR RAIL W/ OPTIONAL LOW PROFILE SILL * (for Single Outswing Only) NOTE: FHA required minimum frame width is 38 " . Effective Date: September 18, 2020 | 07-1000-15 Page-21