YTD 350 T Terrace Door YWW 45 T WINDOW WALL - OUTSWING 6 6 8 7 8 Opp. 4-1/2 " [114.3mm] 8 5 BE9-1749 BE9-4802 *This option is intended to integrate into designs that require ADA-compliant access to balconies and terraces. Compliance can depend on hardware, approach area, reach, forces and motion; and therefore, must be verified by the architectural and engineering team for each application. With properly designed building conditions and correct installation, YKK AP Low profile threshold components will meet accessibility criteria per the AMERICANS WITH DISABILITIES ACT 404.2.5 AND Fair Housing Act Regulations 24 CFR 100.205 Chapter 4. " Thresholds and Accessibility Routes at Exterior Doors. " BE9-4811 E9-4861 SECTION 6 FRAME HEIGHT (F.H.) HEAD 3-1/2 " [88.9mm] SECTION 2 STANDARD SILL 3-1/2 " [88.9mm] SECTION 2A 10 " BOTTOM DOOR RAIL W/ STANDARD SILL BE9-4828 BE9-4827 SECTION 2B 1/2 " [12.7mm] BE9-4802 5-3/16 " [131.8mm] BE9-4811 2-3/16 " [55.6mm] 11-5/32 " [283.4mm] BE9-4830 OPTIONAL LOW PROFILE SILL * (for Single Outswing Only) Note: E2-0750 central gasket not required in doors with Low Profile Sill. BE9-4830 BE9-4828 BE9-4827 1/2 " [12.7mm] BE9-1746 11-5/32 " [283.4mm] BE9-4811 2-3/16 " [55.6mm] 5-3/16 " [131.8mm] E9-4861 6-7/16 " [163.5mm] 2 2-1/4 " [57.2mm] 2 SECTION 2C 10 " BOTTOM DOOR RAIL W/ OPTIONAL LOW PROFILE SILL * (for Single Outswing Only) NOTE: FHA required minimum frame width is 40-1/2 " . Please contact YKK AP Engineering for mullion spacing. Effective Date: September 18, 2020 | 07-1000-15 Page-7