YTD 350 TH Terrace Door MASONRY OPENING - OUTSWING Impact Cap Seal Method 24 23 25 25 Opp. E9-4808 E9-4808 SECTION 23 BE9-4830 11-5/32 " [283.4mm] HEAD E9-4808 BE9-4811 *This option is intended to integrate into designs that require ADA-compliant access to balconies and terraces. Compliance can depend on hardware, approach area, reach, forces and motion; and therefore, must be verified by the architectural and engineering team for each application. With properly designed building conditions and correct installation, YKK AP Low profile threshold components will meet accessibility criteria per the AMERICANS WITH DISABILITIES ACT 404.2.5 AND Fair Housing Act Regulations 24 CFR 100.205 Chapter 4. " Thresholds and Accessibility Routes at Exterior Doors. " BE9-4802 2-3/16 " [55.6mm] BE9-4802 E9-4808 SECTION 26A 10 " BOTTOM DOOR RAIL W/ STANDARD SILL SECTION 26 SILL BE9-4828 BE9-4824 SECTION 26B 1/2 " [12.7mm] 5-3/16 " [131.8mm] E9-4808 OPTIONAL LOW PROFILE SILL* (for Single Outswing Only) BE9-4830 BE9-4828 BE9-4824 1/2 " [12.7mm] 3-1/2 " [88.9mm] Note: E2-0750 central gasket not required in doors with Low Profile Sill. 25 BE9-4811 2-3/16 " [55.6mm] 5-3/16 " [131.8mm] FRAME HEIGHT (F.H.) BE9-4811 27 26 11-5/32 " [283.4mm] BE9-4801 5-3/16 " [131.8mm] 26 23 SECTION 26C 10 " BOTTOM DOOR RAIL W/ OPTIONAL LOW PROFILE SILL * (for Single Outswing Only) NOTE: FHA required minimum frame width is 40-1/2 " . Please contact YKK AP Engineering for mullion spacing. Effective Date: September 18, 2020 | 07-1000-15 Page-15