YTD 350 TH Terrace Door YHC 300 OG CURTAIN WALL - OUTSWING Impact Cap Seal Method 5-1/4 " [133.4mm] 28 E9-3161 BE9-4811 BE9-4811 BE9-4802 E9-4808 2-3/16 " [55.6mm] BE9-4802 SECTION 26A 3-1/2 " [88.9mm] 10 " BOTTOM DOOR RAIL W/ STANDARD SILL SECTION 26 STANDARD SILL 5-3/16 " [131.8mm] E9-4808 BE9-4828 BE9-4824 SECTION 26B Note: E2-0750 central gasket not required in doors with Low Profile Sill. *This option is intended to integrate into designs that require ADA-compliant access to balconies and terraces. Compliance can depend on hardware, approach area, reach, forces and motion; and therefore, must be verified by the architectural and engineering team for each application. With properly designed building conditions and correct installation, YKK AP Low profile threshold components will meet accessibility criteria per the AMERICANS WITH DISABILITIES ACT 404.2.5 AND Fair Housing Act Regulations 24 CFR 100.205 Chapter 4. " Thresholds and Accessibility Routes at Exterior Doors. " BE9-4830 2-3/16 " [55.6mm] 5-3/16 " [131.8mm] E9-4808 26 E9-4808 11-5/32 " [283.4mm] E9-4808 30 OPTIONAL LOW PROFILE SILL* (for Single Outswing Only) BE9-4830 BE9-4828 BE9-4824 1/2 " [12.7mm] BE9-4811 30A 26 27 30 Opp. 11-5/32 " [283.4mm] BE9-4801 30 1/2 " [12.7mm] HEAD 29 FRAME HEIGHT (F.H.) SECTION 28 5-3/16 " [131.8mm] E9-3102 AS-3179 28 SECTION 26C 10 " BOTTOM DOOR RAIL W/ OPTIONAL LOW PROFILE SILL * (for Single Outswing Only) NOTE: FHA required minimum frame width is 38 " . Effective Date: September 18, 2020 | 07-1000-15 Page-17