YTD 350 T Terrace Door YCW 750 OG CURTAIN WALL - OUTSWING 5-1/4 " [133.4mm] 3-3/4 " [95.3mm] 2 BE9-4801 BE9-4811 BE9-4811 E9-4861 SECTION 9 HEAD SECTION 2 3-1/2 " [88.9mm] STANDARD SILL 3-1/2 " [88.9mm] SECTION 2A 10 " BOTTOM DOOR RAIL W/ STANDARD SILL BE9-4824 SECTION 2B 1/2 " [12.7mm] BE9-4828 5-3/16 " [131.8mm] BE9-4802 2-3/16 " [55.6mm] 11-5/32 " [283.4mm] BE9-4830 BE9-4811 2 FRAME HEIGHT (F.H.) BE9-4802 2-3/16 " [55.6mm] 5-3/16 " [131.8mm] E9-4861 OPTIONAL LOW PROFILE SILL* (for Single Outswing Only) 11 *This option is intended to integrate into designs that require ADA-compliant access to balconies and terraces. Compliance can depend on hardware, approach area, reach, forces and motion; and therefore, must be verified by the architectural and engineering team for each application. With properly designed building conditions and correct installation, YKK AP Low profile threshold components will meet accessibility criteria per the AMERICANS WITH DISABILITIES ACT 404.2.5 AND Fair Housing Act Regulations 24 CFR 100.205 Chapter 4. " Thresholds and Accessibility Routes at Exterior Doors. " BE9-4830 BE9-4828 BE9-4824 1/2 " [12.7mm] 11A 5 11 Opp. 11-5/32 " [283.4mm] AS-3569 11 E9-1235 10 9 E9-1215 E9-1206 5-3/16 " [131.8mm] 9 SECTION 2C 10 " BOTTOM DOOR RAIL W/ OPTIONAL LOW PROFILE SILL * (for Single Outswing Only) Note: E2-0750 central gasket not required in doors with Low Profile Sill. NOTE: FHA required minimum frame width is 38 " . Effective Date: September 18, 2020 | 07-1000-15 Page-9