march2021 - 46

T O O L S & E Q U IP M EN T

A roundup of the latest tool and equipment offerings.
Offers a 2-ton capacity
The OTC Supplementary Stand, No.
UH20, is designed to stabilize vehicles
and prevent tipping while they are lifted on hoists. The 3 " saddle, secured
in a support column, is mounted to
a stable tripod base. An easily controlled speed screw quickly brings the
saddle into position. The stand has a
2-ton capacity and ideal for working
on Class 1 through Class 8 vehicles,
from small passenger vehicles to
school buses. It meets ASME PASE2019 safety standards.
For more information visit
FleetMaintenance.com/21156073

Slim and lightweight design
The Ledlenser P4R Work Flashlight features a
slim and lightweight design, with endcap switch
and pocket clip for easy attachment on shirt or
trouser pocket. It offers three modes: high, medium, and economical. With Ledlenser's patented
Advanced Focus System, the light provides precise spot or flood lighting where needed. It also
offers a magnetic charge system so that the battery can be easily recharged at any time. The P4R
Work emits 110 lm and has a maximum run-time
of seven hours.
For more information visit FleetMaintenance.com/21157096

Enables easier cutting of thicker materials
The KNIPEX CoBolt S Compact Bolt Cutter
with Blade Recess is designed for cutting thicker
materials with ease. The cutters feature a compact
size, measuring 6-1/4 " in length, and provide high
cutting power, easily cutting bolts, nails, and rivets
up to 11/64 " in diameter. It has a slim head for better
access to confined areas, a strong lever action mechanism that allows the user to exert less effort when
using the cutter, and below the joint is a gripping surface for pulling wires with a diameter from 3/64 " . In
addition, it has laser-cut edges on the blades which
prevent material being cut from slipping.
For more information visit FleetMaintenance.com/21203719

Releases tension on serpentine belts
The Lisle Corporation Serpentine Belt Tool Kit,
No. 59670, releases tension on serpentine belts
with a spring loaded idler pulley. The kit is used to
remove and install belts on serpentine belt systems
using the spring loaded idler pulley. For applications
with limited access, 13mm and 16mm sockets are
built into the handle. The kit covers most domestic
and some import applications. It comes with an
extension for hard-to-reach idler pulleys, along with
nine low profile sockets to fit into tight spots.
For more information visit FleetMaintenance.com/21165863

Features an anti-restart function
The Makita Paddle Switch Angle Grinders
with Non-Removable Guards, Nos. GA4553R
and GA5053R, feature an 11A motor and delivers
11,000 rpm to handle high-demand applications.
The GA4553R has a wheel diameter of 4-1/2 " and
the GA5053R has a 4-1/2 " / 5 " wheel diameter. Both
grinders have a non-removable guard that can be
quickly rotated for adjustment by the push of a
lever. They also feature an anti-restart protection,
an electronic feature engineered to prevent accidental motor start-up in the event that the grinder
is left in the on-power switch position after a power
disruption. For added durability, armature copper
coils are epoxy-protected with a zig-zag pattern to
protect against debris and to sufficiently dissipate
heat to prevent overheating.
For more information visit FleetMaintenance.com/21203512

Provides extra-long reach
for more accessibility
The Cal-Van Tools XL Clip Lifter Set, No. 114, features extra-long reach for more accessibility when
dealing with fasteners in limited space. The set
utilizes 5mm and 11mm spreads, applicable across
the automotive industry. Each lifter is offset for
increased leverage, constructed of chromed highstrength steel, finished with vinyl grips, and easily
stored in the included EVA foam tray.
For more information visit FleetMaintenance.com/21202748

The Matco Tools 16V Impact Ratchet Kit, No.
MCL16IRSK2M, features a 6 " extended length
for longer reach and greater access for front
end engine accessories, timing covers, air cleaners, transmission bellhousing bolts, and dash
work. Its 310 rpm free speed makes quick work
of removing fasteners and its captured head
design increases head durability and prevents
head spreading. The impact ratchet is engineered to withstand 155 ft-lbs of manual torque
and 35 ft-lbs of maximum torque.
For more information visit FleetMaintenance.com/21204644

Offers up to 36 different puller configurations
The Snap-on Light Duty Manual Interchangeable
Master Puller Set, No. CJ2400, has a 2.5 ton capacity
and is designed to provide technicians access and power
for a wide variety of pulling applications such as removal
of gears, sprockets, pulleys, bearings, bushings, sleeves,
seals, bronze and Oilite bushings and pressed-in studs,
and more. The exchangeable components create 36 different puller configurations while the spring-loaded locking mechanism reduces the puller slipping off of the work
surface as its jaws easily latch on for both inside and outside
pulling applications. The reversible jaw design and two-position yokes accommodate multiple jaw lengths up to 3.5 " while the
spring-loaded mechanism allows speedy changeover without disassembling the puller and without the need of nuts and bolts.
For more information visit FleetMaintenance.com/21163931

46 Fleet Maintenance | March 2021

6 " extended length for longer reach

http://www.FleetMaintenance.com/21156073 http://www.FleetMaintenance.com/21157096 http://www.FleetMaintenance.com/21203719 http://www.FleetMaintenance.com/21165863 http://www.FleetMaintenance.com/21203512 http://www.FleetMaintenance.com/21204644 http://www.FleetMaintenance.com/21202748 http://www.FleetMaintenance.com/21163931

march2021

Table of Contents for the Digital Edition of march2021