september2021 - 67

FEATURED
P RODUCT
Tighten and loosen high-torque bolts
The Ingersoll Rand 1 " Cordless Impact Wrenches,
Nos. W9491 and W9691, are designed to increase
productivity, convenience, and safety when tightening
or loosening high-torque bolts and nuts. With 3,000
lb.-ft. of nut-busting torque, the W9691 6 " extended
anvil Cordless Impact Wrench provides the power
technicians need to handle bolts and nuts that are
rusted or otherwise hard to break loose in a cordless
design. The W9491 Impact Wrench provides 2,600 lb.ft.
of torque. Kits are available with dual-bay charge,
1 " cordless impact, and two or four 5.0 Ah batteries.
Additional anvil options are available.
For more information visit FleetMaintenance.com/21233810
Designed to clean cooling coils with air instead of water
The Lock Technology Radiator Rocket Coil & Line Cleaner, No. LT886, is
designed to clean cooling coils for radiators, transmission lines, oil and fuel lines,
air-to-air aftercoolers, condensers, evaporators, fluid coolers, and more. The
LT886 utilizes air pressure and a broom with a removable brush head for access
to constrained spaces. The 4 " air slot in the brush head puts out maximum air
cleaning volume and pressure without damaging coils, lines, or fins. The LT886
can be configured in 3', 2', and 1' lengths and is able to access 1 " gaps with the
brush, or 0.7 " gaps without the brush. The brush head is always 90-degrees
toward radiator fins for maximum cleaning efficiency and coil protection.
For more information visit FleetMaintenance.com/21209238
800-421-7241 | ltitools.com
Utilizes a 3/8 " square drive for use with a ratchet
Provides evenly distributed pressure
The Cementex T‑Handle Driver Tools include hex head wrenches,
six-point socket wrenches, and drives. All of the T-handle tools
incorporate the Cementex two-layer insulation system and solid core
handle to distribute pressure evenly through the gloved hand. Made
in the U.S. featuring hardened American steel, the T-handle tools rigid
construction prevents twisting and flexing. The T-handle hex wrenches
are available in multiple shaft lengths and a range of combinations
in order to meet each application's unique insulated hand tool needs.
Additionally, the T-handle six-point socket wrenches and drives are
available in a range of sizes and lengths to meet users' needs.
For more information visit FleetMaintenance.com/21156571
The Cal‑Van Tools Dodge Hub Nut Socket, No.
90703, is designed to remove and install 6-pin rear
axle locknuts on 2006 to 2014 Dodge/Ram trucks,
models 1500 to 5500. This tool is a heavy-duty, onepiece
design that securely fits in the locknut, utilizing
a 3/8 " square drive for use with a ratchet. It is ideal to
use when retorquing rear wheel bearings during regular
maintenance, hub, and/or seal replacements.
For more information visit FleetMaintenance.com/21202747
Weighs 2.9 lb. with battery
Features an adjustable nose piece
The Encon Safety
Products Veratti Lite
2.0 Safety Spectacles
feature advanced fog
resistance. The glasses
also have adjustable temples
and an adjustable
nose piece to help ensure
fit and wearer comfort,
as well as brow guard protection. The lenses are made
from high-impact polycarbonate and are available in
clear or gray.
For more information visit FleetMaintenance.com/21219186
The Makita 18V LXT Sub‑Compact Brushless 1/2 " Driver‑Drill Kit, No.
XFD15SY1B, features a compact and ergonomic design, measuring 5-7/8 " in
length and weighing 2.9 lb. with battery. It has a mechanical variable two-speed
transmission (0-500 and 0-1,700 rpm) for a many drilling and fastening applications,
dual LEDs to illuminate the work area, and a brushless motor that
delivers 350 lb.-in. of maximum torque. It's powered by an 18V lithium-ion
slide-style battery and comes equipped with Star Protection
Computer Controls to protect against overloading, over-discharging,
and over-heating. It also comes with a 1/2 " keyless chuck for fast and
easy bit installation and removal.
For more information visit FleetMaintenance.com/21233818
Keeps sockets and accessories secure
The Socket Roll SAE Pro is designed to keep sockets
and accessories secure and easy to transport. It's
available in three SAE versions: 1/4 " , 3/8 " , and 1/2 " .
Each offer easy-to-read drive socket sizes for quick
access. The organizers are made in the U.S. with military-grade
elastic material that prevents premature
wear and stretching while keeping tools dry and protected from fluids. The SAE Pro measures 14 " by 14.5 " rolled
out flat and 3.5 " by 14 " rolled up. The organizers have 21+ socket sleeves, deep and short sizes, with additional
sleeves for accessories. The base fabric is a double layered nylon with PVC backing that features a plastic insert
behind each socket row for added strength and protection.
For more information visit FleetMaintenance.com/21163040
September 2021 | FleetMaintenance.com
67

http://www.FleetMaintenance.com/21233810 http://www.FleetMaintenance.com/21209238 http://www.ltitools.com http://www.FleetMaintenance.com/21156571 http://www.FleetMaintenance.com/21202747 http://www.FleetMaintenance.com/21233818 http://www.FleetMaintenance.com/21219186 http://www.FleetMaintenance.com/21163040 http://www.FleetMaintenance.com

september2021

Table of Contents for the Digital Edition of september2021