august2021 - 21

CATEGORY: ADAS
MaxiSYS IA800 Intelligent ADAS:
Process is Precision
W
hen it comes to the calibration of Advanced Driver
Assistance Systems (ADAS) components, there are two
essential servicing concepts, follow the prescribed vehicle
manufacturer instructions and document everything from
pre-calibration setup to post-calibration validation.
The Autel Standard Frame ADAS Calibration System, the
MaxiSYS IA800 Intelligent ADAS optical positioning system
adaption package combined with the Autel calibration software
enable technicians to perform these procedures via the most
efficient and affordable calibration solution in the industry.
The IA800 employs six high-resolution cameras and ADAS
positioning software to transform Autel's Standard Calibration
frame into a rapid yet precise frame centering and vehicle
distancing unit, enabling technicians to accomplish target to
vehicle placement in minutes.
Wheel clamps with camera targets are attached to the rear
wheels, and a standing target component is placed in the front
or to the side of the vehicle, depending on the vehicle make,
model and year. The MaxiSYS tablet, now placed securing on
the frame, is paired with the cameras.
The system recognizes the positioning targets and calculates
the current angle, distance, and offset position of the frame to
the vehicle. The technician follows the onscreen instructions to
move the frame or adjust its angle until the current values match
the required values. Checkmarks display for each parameter once
the required position values are met, and that's it, the vehicle
is ready for calibration. Compare that setup with one using
mechanical tools such as plumb bobs and measuring tape that
takes 40 minutes on average.
175 Central Avenue
Farmingdale,NY 11735
1-855-288-3587
For more information, click on
PD e-inquiry at
VehicleServicePros.com
www.autel.com
Added value to the system is its alignment Pre-Check capability
that uses the IA800's camera system and targeted wheel clamps
attached to all four wheels to determine the vehicle's current
alignment specifications and compare them with the vehicle
manufacturer's allowed tolerances. Ensuring a vehicle is correctly
aligned is essential to ensuring a correct ADAS component
calibration. If within OE-specified tolerances, the technician can
proceed to optical positioning of the frame to the vehicle. A
4-wheel alignment should be performed if the vehicle is out of
the OE's tolerance range. The IA800 system is incredibly userfriendly,
with the tablet displaying vehicle-specific, step-by-step
instructions for the technician.
This complete solution of software, frame, and targets, and now
with the IA800 optical system enables technicians to realize
a verifiable component calibration workflow of Pre-Check
(alignment), Position (OE-specified target to vehicle positioning),
Perform (camera, radar. Lidar, and Night Vision component
calibration with any MaxiSYS tablet with ADAS calibration
software) and Provide (detailed documentation of
complete process). 
SPECIAL ADVERTISING SECTION
Professional Distributor I August 2021 I VehicleServicePros.com 21
http://www.VehicleServicePros.com http://www.autel.com http://www.VehicleServicePros.com
august2021

Table of Contents for the Digital Edition of august2021
