Professional Distributor - 31

CLORE AUTOMOTIVE

The Clore Automotive SOLAR Pro-Logix
12V 100A Flashing Power Supply and
60/40/10A Battery Charger, No. PL6100, is
designed to provide stable power on-demand, up
to 100A, to a vehicle electrical system to support
module reprogramming. It also provides full-service
battery charging capability from 10A to 60A, to
service everything from small vehicle batteries to
Group 31 batteries. In power supply mode, it features
a voltage output range of 13.1-14.9V, adjustable in
0.1V increments, allowing the operator to dial the
output in exactly as specified by the supplier of the
vehicle under service. In charging mode, it features
over-voltage protection, reverse polarity protection,
smart clamp technology, and battery fault detection.

SOLAR Pro-Logix 12V
100A Flashing Power
Supply and 60/40/10A
Battery Charger
This product provides stable power and
full service battery charging.

APPLICATION

The PL6100 is a flashing power supply for shops.
Its clean power delivery provides support for
reflashing events, and its adjustability allows it
to meet OE voltage requirements. It provides
comprehensive charging capabilities, enabling
coverage for two applications: flashing power
supply and heavy duty battery charging.

FEATURES AND BENEFITS
* Delivers up to 100A to maintain system
voltage during reprogramming events
* Features very low voltage ripple for clean
power delivery

ORIGIN

The PL6100 was developed to address the
market need for a versatile, precise, high
amperage power supply that can meet
OE voltage requirements. The PL6100
also incorporates advanced battery
charging capabilities.

STORAGE AND DISPLAY

The PL6100 is shipped as a single unit,
double boxed for added protection. Clore
Automotive suggests storing the PL6100 on
the top of a toolbox or on a prominent shelf.

* Features rapid load response for quick
recovery from load increases
* Detachable input and output cords
* Allows voltage control from 13.1-14.9V,
in 0.1V increments

SELLING POINTS
* The PL600 is designed for shops
performing flashing/reprogramming
* The PL6100 is designed as a charger for
all automotive servicing needs
* The PL6100 is manufactured with robust
construction and convenience features

* Fully automatic operation
* 60/40/10A charge rates handle everything
from small batteries to Group 31 batteries
* Specific charging routines for flooded,
AGM, spiral wound, deep cycle, and
marine batteries
* Able to manage completely dead batteries

SUGGESTED RETAIL PRICE

$799

FOR MORE INFORMATION

800-328-2921
cloreautomotive.com
Enter #59 at "e-inquiry" on
VehicleServicePros.com

MANUFACTURING SPECS

The PL6100 is ETL-approved to meet the
UL1236 Battery Charging standard, as well
as all FCC requirements for high frequency
devices, according to the company. It features
heavy duty steel construction and extra-long #2
AWG output cables. It delivers a power supply
with voltage ripple less than 100mV, as well as
Rapid Load Response Technology.

* Sturdy steel frame stands up to harsh
shop environments
* Extra-long 13' output cables reach the
starting points on vehicles
* Heavy duty PowerJaw clamps provide
power transfer and are angled for
improved access
* Easy-to-use interface with smart
display feedback

Professional Distributor I December 2019 I VehicleServicePros.com 31
http://www.cloreautomotive.com http://www.VehicleServicePros.com http://www.VehicleServicePros.com
Professional Distributor

Table of Contents for the Digital Edition of Professional Distributor
